Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B515E-21

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B515E-21

|
Need a Specific Revision?

The 1326AB-B515E-21 servo motor is an Allen-Bradley/Rockwell Automation Bulletin 1326 series AC-powered low-inertia servo motor. It operates with an AC voltage rating of 460 Volts AC, and a maximum rated motor speed of 3000 RPM. The 1326AB-B515E-21 servo motor supports a maximum continuous output torque rating of 10.4 N-m or 92 pounds on an inch, and it can still support this output torque rating even when it has stalled. This servo motor is meant to be mounted vertically, but it can be mounted vertically at any angle with its shaft pointing either up or down. The 1326AB-B515E-21 servo motor has a rated output of 2.3 kilowatts.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B515E-21

ManufacturerAllen Bradley
Product TypeServo Motor
Product Line1326 Motors
Part Number1326AB-B515E-21
UPC662453177380
Weight46.69 lbs (21.18 kg)
Voltage460/380V AC
Frame Diameter149 mm
Rated Motor Speed3000 rpm
Flange and Shaft SeriesIEC Metric Flange with Keyway
Motor Rated Torque10.4 Nm
Motor Rated Output2.3 kW
System Continuous Torque10.4 Nm
System Peak Stall Torque31.2 Nm
Standard OptionN/A
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B515E-21 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B515E-21 units instead of migration.

View as PDF
Request a Repair

The 1326AB-B515E-21 servo motor from the Allen-Bradley advanced 1326AB Torque Plus series is a 3000 RPM rated servo motor. The 1326AB brushless servo motors are designed for smooth performance and continuous output. They are available in 3 frame sizes which are 108, 149, and 194 millimeters and a wide torque range from a minimum of 2.7 N-m to a maximum of 50 N-m. The motors are equipped with 1 of 3 feedback options which are resolver based feedback, absolute multi-turn feedback resolvers, and absolute single-turn feedback resolvers. Applications for which the 1326AB series servo motors are designed include automotive, converting, and machine tool applications.

The 1326AB-B515E-21 servo motor has a rated torque of 92 pounds on an inch and 2.3 kilowatts of power output. The rotor inertia is 0.038 lb-in-s2. This servo motor has a frame diameter of 149 millimeters. The magnet stack length of the 1326AB-B515E-21 servo motor is 15 millimeters. The feedback option provided on the servo motor is resolver-based feedback. For mounting the motor, an IEC metric flange with metric shafts is provided. The continuous stall torque ratings for the 1326AB-B515E-21 servo motor when used with the Allen-Bradley AM04, AM07, AM50, and AM75 axis modules are 7.7, 10.4, 10.4, and 10.4 N-m, respectively. The peak stall torque ratings when the motor is used with the AM04, AM07, AM50, and AM75 axis modules are 15.4, 25.6, 31.2, and 31.2 N-m, respectively. The continuous stall current ratings for the motor when it is used with these axis modules are 4.5, 6.1, 6.1, and 6.1 Amps, respectively, and the peak stall current ratings for the motor when used with theses axis modules are 9, 15, 18.3, and 18.3 Amps, respectively.

Revision Part #Also known as
1326AB-B515E-21 Ser A1326AB-B515E-21/A, Series A, Rev A
1326AB-B515E-21 Ser B1326AB-B515E-21/B, Series B, Rev B
1326AB-B515E-21 Ser C1326AB-B515E-21/C, Series C, Rev C
Don't see your particular revision? Contact us now.