1326AB-B515E-21ML

The Allen-Bradley 1326AB-B515E-21ML is a ferrite AC Servo Motor with a 460V AC voltage rating with 3000 RPM rated speed at 460V AC and 2500 RPM at 380V. It has a 149 mm frame diameter, a 165 mm bolt center, and a 15-magnet stack length and has an IEC metric flange with keyway dedicated to the motor’s mounting and shaft. The motor rated torque and the system torque of the 1326AB-B515E-21ML motor are the same at 10.4 N-m or 92 pounds on an inch and its motor rated output is 2.3 kW. It also has a system peak stall torque of 25.6 N-m, a system peak stall current of 15, and a system continuous stall current of 6.1 A when used with the AM07 1394 series axis module, and a system continuous torque of 7.7 N-m, system peak stall torque of 15.4 N-m, a system peak stall current of 9, and a system continuous stall current of 4.5 A with the AM04 axis module.

When mounting, make sure that the 1326AB-B515E-21ML motor is vertically mounted at any angle with the shaft either up or down. You can only use this motor with high-performance motion 1391 Digital AC Servo Drives that have an input of 230V AC. The 1326AB-B515E-21ML  motor is equipped with a three-phase stator field that is sinusoidally wound and that results in the motor having the capability for heat transfer to the ambient temperature and better low-speed operations, an aluminum housing featuring a TENV construction that also allows better cooling via the installed fins, and an IP65 enclosure rating, among others.