Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B515G-21-ML

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B515G-21-ML

|
Need a Specific Revision?

The 1326AB-B515G-21-ML servo motor is an AC-powered industrial servo motor that operates with low levels of inertia. It has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 1326 series of AC servo motors. The 1326AB-B515G-21-ML AC servo motor has a voltage rating of 460 Volts AC and its maximum motor speed is 5000 RPM. It can operate with low levels of inertia because of the permanent ferrite magnets that are installed inside it. The 1326AB-B515G-21-ML AC servo motor has an IP 67 protection rating and it uses multi-turn high-resolution feedback.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B515G-21-ML

ManufacturerAllen Bradley
Product TypeFerrite AC Servo Motor
Product Line1326 Motors
Part Number1326AB-B515G-21-ML
Weight15.00 lbs (6.80 kg)
Voltage460 Volts AC, 380 Volts AC
Frame Series149-millimeter frame diameter (165-millimeter bolt center)
Motor Length1.5 inches
Motor Speed460 Volts AC: 5000 rpm, 380 Volts AC: 4000 rpm
Flange and Shaft SeriesIEC metric flange with a keyway
FeedbackMulti-turn high-resolution feedback
Standard OptionsIP 67 environmental rating only for all frame series
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B515G-21-ML has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B515G-21-ML units instead of migration.

View as PDF
Request a Repair

The 1326AB-B515G-21-ML servo motor is a servo motor from Allen-Bradley that can be used as a drop-in replacement for Allen-Bradley 1326AB series servo motor since it was originally manufactured by Allen-Bradley. The 1326AB-B515G-21-ML servo motor is a newer part in the 1326AB series. The manufacturer offers replacement services for all the servo motors in the 13226AB series. The servo motor has a rated output power of 3.9 Horsepower and 2.9 kilowatts.

The 1326AB-B515G-21-ML servo motor has peak and continuous stall torque ratings of 31.2 N-m and 10.4 N-m, respectively. The servo motor has a maximum speed of 5000 revolutions per minute. The servo motor’s winding has a phase-to-phase resistance of 2.0 Ohms when the winding is subject to a maximum temperature of 30 degrees Celsius and a minimum temperature of 20 degrees Celsius and an average temperature of 25 degrees Celsius. The 1326AB-B515G-21-ML servo motor has an input voltage rating of 380 Volts AC. Motors in this series have a thermostat that is used as a switch for a 15 Volts DC logic signal. The thermostat has a maximum temperature rating of 140 degrees Celsius plus or minus 5 degrees Celsius. Additionally, the thermostat has a rated current of 2.5 Amps at a power factor of 1.0.

Revision Part #Also known as
1326AB-B515G-21-ML Ser A1326AB-B515G-21-ML/A, Series A, Rev A
Don't see your particular revision? Contact us now.