Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B520E-M2K5LS

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B520E-M2K5LS

|
Need a Specific Revision?

The Allen-Bradley 1326AB-B520E-M2K5LS AC servo motor is a low-inertia type of servo motor from the Bulletin 1326 servo motor series. It achieves its low inertia ratings with its 2-inch magnet stack that is made of powerful ferrite magnets. The 1326AB-B520E-M2K5LS AC servo motor operates with 460 Volts AC rated voltage and a maximum speed of 3000 RPM. Its output power rating is 2.9 kilowatts maximum. The 1326AB-B520E-M2K5LS AC servo motor is compatible with some of the axis modules from the Allen-Bradley Bulletin 1394 series.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B520E-M2K5LS

ManufacturerAllen Bradley
CategoryMotors
Product Line1326 Motors
Part Number1326AB-B520E-M2K5LS
Weight45.00 lbs (20.41 kg)
DescriptionTorque Plus AC Servo Motor
Voltage460 Volts AC
Power Rating2.9 Kilowatts
Rotor Speed3000 RPM
Continuous Torque Rating115 Pounds on an inch
Continous Stall Current Rating6.7 Amps
Frame size100 millimeters
Magnet stack lenght20 millimeters
Feedback OptionMulti-turn High-resolution Encoder
Holding Brake Option24 Volts DC (Spring-set)
Connector OrientationShaft Exit
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B520E-M2K5LS has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B520E-M2K5LS units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-B520E-M2K5LS Torque Plus AC Servo Motor is a high-performance 3-phase brushless AC servo motor designed to meet the stringent needs of high-performance motion control systems. This motor features a special flux profile permanent magnet rotor for rapid servo response and a specially designed motor housing that has a reduced motor length and at the same increases the torque rating. The 1326AB-B520E-M2K5LS Servo Motor is rated at 460 Volts AC and it is suitable for applications with an operating voltage range between 380 and 480 Volts AC. This servo motor has a standard motor torque rating of 115 pounds on an inch at 460 Volts AC input and a peak system torque rating of 345 pounds on an inch. The 1326AB-B520E-M2K5LS Servo Motor has a peak power output rating of 2.9 Kilowatts and a peak stall current rating of 20.1 Amps. It has a standard rotor speed of 2500 RPM at 380 Volts AC and a maximum rotor speed of 3000 RPM at 460 Volts AC input voltage.

The 1326AB-B520E-M2K5LS Servo Motor comes with a battery-free multi-turn type of high-resolution encoder that provides absolute position feedback within 4,096 revolutions. It also comes with a 126 pounds on an inch and 24 Volts DC rated spring-set type holding brake, which makes it suitable for applications requiring a high degree of safety. The 1326AB-B520E-M2K5LS Servo Motor has a standard rotor size of 3.94 Inches and a magnetic stack length of 0.79 inches. The 1326AB-B520E-M2K5LS Servo Motor comes with a shaft-exit connector type and an IP 67 protection rating that provides protection from temporary immersion in water. The 1326AB-B520E-M2K5LS Servo Motor is compatible with the 1395 AM-(04, 07, 50, and 75) Axis modules, and it has an operating temperature range of 0 to 40 degrees Celsius.