Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B530E-21-X30

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B530E-21-X30

|
Need a Specific Revision?

The 1326AB-B530E-21-X30 servo motor has been designed and manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 1326 series. It operates with low inertia levels and high servo response levels due the the ferrite magnets that are installed in a 3-inch stack inside it and which are engineered with special flux profiles. The 1326AB-B530E-21-X30 servo motor can operate without derating at a maximum ambient temperature of 104 degrees Fahrenheit. Its maximum rated motor speed is 3000 RPM. The 1326AB-B530E-21-X30 servo motor’s output rating is 4.2 kilowatts.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B530E-21-X30

ManufacturerAllen Bradley
Product TypeServo Motor
Product Line1326 Motors
Part Number1326AB-B530E-21-X30
Weight15.00 lbs (6.80 kg)
Voltage460/380V AC
Frame Diameter149 mm
Rated Motor Speed3000 rpm
Flange and Shaft SeriesIEC Metric Flange with Keyway
Motor Rated Torque18 Nm
Motor Rated Output4.2 kW
System Continuous Torque18 Nm
System Peak Stall Torque54.2 Nm
Standard OptionN/A
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B530E-21-X30 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B530E-21-X30 units instead of migration.

View as PDF
Request a Repair

The 1326AB-B530E-21-X30 AC servo motor from the Allen Bradley-Rockwell Automation 1326AB product series is a powerful motor expected to perform at the highest rate. The motor has a frame diameter of 149 millimeters (5.86 inches) and a rated speed of outstanding 3000 RPM. The other specifications of the motor include motor rated torque and continuous system torque at 18 N-m, an output of 4.2 kW, and a system peak stall torque at 54.2 N-m. Besides that, the 1326AB-B530E-21-X30 motor has an input of 380 to 460 Volts AC and it comes by default without any of the standard options included. When it comes to mounting and shaft, the 1326AB-B530E-21-X30 motor has a NEMA/IEC metric flange with keyway. This motor will meet even the most demanding requirements needed from a servo system due to high performance which is a signature characteristic for the 1326AB series. Great results can be achieved when servo motors from this series are used in combination with AC servo controllers from the 1391 series. The three-phase brushless AC synchronous motors include features such as 100% continuous rated output torque at zero rpm, wound stator field method for transferring heat directly to ambient, adapting to work perfectly at low-speed operation, increased servo response, etc.

The 1326AB-B530E-21-X30 motor has a totally enclosed-non-vented construction (TENV) and an IP65 rated enclosure when combined with the optional shaft seal. The construction provides all of the necessary protection to be used in rough conditions and industrial environment. Any liquid that could come from water jets or similar would not enter the motor due to this level of protection. If the motor is mounted externally with the usage of blower/encoder/resolver, the IP rating would be lower. The motor features a ferrite magnet for lower cost and some military grade connectors which will expand service life. The available options for the 1326AB-B530E-21-X30 motor include the power supply for brake, kits for a seal of the shaft, different mounts and others.

Revision Part #Also known as
1326AB-B530E-21-X30 Ser A1326AB-B530E-21-X30/A, Series A, Rev A
Don't see your particular revision? Contact us now.