1326AB-B530E-21-Z06

The 1326AB-B530E-21-Z06 is a servo motor that is manufactured by Allen-Bradley under the 1326 motor series. The 1326AB-B530E-21-Z06 features a voltage of 460 or 380 Volts AC and comes with a frame diameter of 149 millimeters. It has a rated motor speed of 3000 revolutions per minute and features the IEC Metric Flange with A keyway. The 1326AB-B530E-21-Z06 has a motor rated torque of 18 N-m with a motor rated output of 4.2 kilowatts. The 1326AB-B530E-21-Z06 also features a system continuous torque of 18 N-m with a system peak stall torque of 54.2 N-m. The 1326AB-B530E-21-Z06 is a torque plus motor that comes with a specially manufactured housing, reducing the motor length and increasing the continuous torque ratings.

The 1326AB-B530E-21-Z06 is one of the high-performance three-phase brushless AC synchronous servo motor designed by Allen-Bradley and it meets the stringent requirements of high-performance motion systems. The 1326 series of motors comes with special flux permanent magnets. These motors are engineered so that they increase the servo response. The 1326AB series features a three-phase sinusoidal wound stator field, offering smooth operation at low speeds. The motors feature TENV construction with IP65 standard ratings and the IP67 option is also available with an optional shaft seal. These motors come with extruded aluminum housing, offering improved heat transfer and 100% continuous rated output torque at stall. These motors come as UL listed insulation system modules with the ability to install the motor with the shaft facing up or down at any angle. The motors feature a threaded hole on the face of the shaft that serves to secure the couplings.