Product image is representative; revision or series may vary. Contact us to request a specific version.
1326AB-B530E-21MK5
The Allen-Bradley/Rockwell Automation 1326AB-B530E-21MK5 servo motor is rated for 460 Volts AC of motor voltage and 3000 RPM of motor speed. It is part of the Allen-Bradley/Rockwell Automation Bulletin 1326 series of AC servo motors. The 1326AB-B530E-21MK5 AC servo motor uses a multi-turn high-resolution encoder for its feedback. One of the special features of this servo motor is a holding brake that has a 24 Volts DC coil and torque ratings of 13.6 N-m or 120 pounds on an inch. The 1326AB-B530E-21MK5 AC servo motor comes in a Size 5 frame and it is meant to be mounted vertically.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for 1326AB-B530E-21MK5
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Ferrite AC Servo Motor |
| Product Line | 1326 Motors |
| Part Number | 1326AB-B530E-21MK5 |
| Weight | 45.00 lbs (20.41 kg) |
| Voltage | 460 Volts AC, 380 Volts AC |
| Frame Series | 149-millimeter frame diameter (165-millimeter bolt center) |
| Motor Length | 3 inches |
| Motor Speed | 460 Volts AC: 3000 rpm, 380 Volts AC: 2500 rpm |
| Flange and Shaft Series | IEC metric flange with a keyway |
| Feedback | Multi-turn high-resolution feedback |
| Standard Options | 13.6 N-m (120 pounds on an inch) Holding brake with 24 Volts DC coil for 1326AB-B5 frame series |
| Product Lifecycle Status* | Discontinued/Obsolete |
* The Allen Bradley 1326AB-B530E-21MK5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B530E-21MK5 units instead of migration.
The 1326AB-B530E-21MK5 servo motor is an AC servo motor from Allen-Bradley. The servo motor has a holding brake with a torque of 126 pounds on an inch. Additionally, the brake has a rated input power of 24 Volts DC. Unless the system power is interrupted, the holding brake should not be used as a stopping brake. The 1326AB-B530E-21MK5 servo motor has a continuous stall torque of 159 pounds on an inch and a peak stall torque of 480 pounds on an inch. For the current, the motor’s rated current stands at 13.4 Amps. The 1326AB-B530E-21MK5 servo motor has a horsepower rating and an apparent power rating of 5.6 Horsepower and 4.2 kilowatts, respectively. The 1326AB-B530E-21MK5 servo motor belongs to the Allen-Bradley 1326AB series of servo motors that are used to run high-performance motion systems. The motor’s winding has a phase to phase resistance of 1.6 ohms at plus or minus 15%.
Note that the resistance is calibrated when the 1326AB-B530E-21MK5 servo motor is subjected to an ambient temperature of 25 degrees Celsius with an allowance of plus or minus 5 degrees Celsius. Additionally, the phase-to-phase winding inductance for the 1326AB-B530E-21MK5 stands at 16.4 milliHenrys. The motor has a dielectric rating of 1500 Volts AC at a frequency of 50 to 60 Hertz for 1 minute for power leads to the ground. The 1326AB-B530E-21MK5 servo motor has maximum operating and storage temperatures of 40 degrees Celsius and 70 degrees Celsius, respectively. Also, the minimum operating and storage temperatures for the 1326AB-B530E-21MK5 servo motor stand at 0 degrees Celsius and -30 degrees Celsius, respectively. To avoid fatal injuries from short-circuits, the servo motor should not be operated in environments with condensing humidity.
| Revision Part # | Also known as | |
|---|---|---|
| 1326AB-B530E-21MK5 Ser A | 1326AB-B530E-21MK5/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- 1326A8-8530E-21MK5
- 1326A8-B530E-21MK5
- 1326A88530E21MK5
- 1326A8B530E21MK5
- 1326AB-8530E-21MK5
- 1326AB-B530E-2IMK5
- 1326AB-B53OE-21MK5
- 1326AB8530E21MK5
- 1326ABB530E21MK5
- 1326ABB530E2IMK5
- 1326ABB53OE21MK5
- I326A8-853OE-2IMK5
- I326A8853OE2IMK5
- I326AB-B530E-21MK5
- I326AB-B530E-2IMK5
- I326ABB530E21MK5
- I326ABB530E2IMK5
This Ferrite AC Servo Motor(460V/380V AC) comes with a 149 mm frame diameter (165 mm bolt center) and a 3 in. magnet stack length. Depending on the voltage, this unit's motor speed is 460V: 3000rpm / 380V: 2500rpm, and the flange and shaft type is a IEC metric flang with keyway. The feedback type is a Multi-turn high-resolution feedback and has a 13.6 N-m (120 lb-in.) Holding brake with 24V DC coil for 1326AB-B5 frame series.