Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B530E-M2K5L

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B530E-M2K5L

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 1326AB-B530E-M2K5L servo motor is a brushless servo motor that is designed with permanent magnet technology. It is available through the Allen-Bradley Bulletin 1326 Motors product line. The 1326AB-B530E-M2K5L brushless servo motor is classified in the 400 Volts voltage category in the Bulletin 1326 Motors line because its voltage rating is 460 Volts AC. It operates with feedback that is supplied by a multi-turn high-resolution encoder. The 1326AB-B530E-M2K5L brushless servo motor can handle a maximum rotor speed of 3000 RPM.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B530E-M2K5L

ManufacturerAllen Bradley
CategoryMotors
Product Line1326 Motors
Part Number1326AB-B530E-M2K5L
UPC662453969688
Weight96.00 lbs (43.54 kg)
DescriptionTorque Plus AC Servo Motor
Voltage460 Volts AC
Power Rating4.2 Kilowatts
Rotor Speed3000 RPM
Continuous Torque Rating160 Pounds-inches (lb-in)
Continous Stall Current Rating9.5 Amps
Frame size100 millimeters
Magnet stack lenght30 millimeters
Feedback DeviceMulti-turn High-resolution Encoder
Holding Brake Option24 Volts DC (Spring-set)
Connector OrientationRear-end
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B530E-M2K5L has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B530E-M2K5L units instead of migration.

Request a Repair

The 1326AB-B530E-M2K5L Torque Plus AC Servo Motor is a 3-phase AC servo motor belonging to the Allen-Bradley 1326AB servo motor family that is built for the tough demands of a wide range of industrial motion control systems. This AC motor has a special permanent magnet rotor that offers cost-effective servo response and performance, and it has a specially engineered housing that improves motor torque-to-size ratio. The 1326AB-B530E-M2K5L Servo Motor is a 3-phase motor with a 460 Volts AC rating and an acceptable operating voltage range of 380 Volts AC to 460 Volts AC. It has a power rating of 4 Kilowatts and a base rotor speed of 3000 RPM. The 1326AB-B530E-M2K5L Servo Motor has a torque rating of 160 pounds on an inch at 9.5 Amps of system current rating and a peak torque rating of 480 pounds on an inch at 28.5 Amps of peak stall current rating.

The 1326AB-B530E-M2K5L Servo Motor has a multi-turn high-resolution encoder that offers absolute positioning feedback within multiple revolutions (up to 4096 revolutions) and this encoder device does not require a battery for operation. It has a spring-set 24 Volts DC holding brake option with 120 pounds on an inch of holding torque. The 1326AB-B530E-M2K5L Servo Motor has a total frame size of 100 millimeters and a net stack length of 30 millimeters. Like all Allen-Bradley 1326AB servo motors, the 1326AB-B530E-M2K5L Servo Motor comes with an environmentally-sealed feedback and power cable that is connected in rear-end connector configuration. The 1326AB-B530E-M2K5L Servo Motor has an IP 67 protection rating and a rated operating temperature range of 0 to 40 degrees Celsius. It has a net shipping weight of 76 pounds (motor only) and is designed for use within 5 to 95% (non-condensing) relative humidity.