Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B530E-S2K5LS

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B530E-S2K5LS

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 1326AB-B530E-S2K5LS servo motor is an AC-powered permanent magnet servo motor from the Bulletin 1326 product line. It can generate 300 RPM of motor speed and 4.2 kilowatts of output power at a rated voltage of 460 Volts AC. The 1326AB-B530E-S2K5LS AC servo motor is designed with permanent magnet technology that increases its servo response and decreases its friction. The permanent magnets in this servo motor are arranged in a 3-inch stack. The 1326AB-B530E-S2K5LS AC servo motor can operate at full power at up to 40 degrees Celsius or 104 degrees Fahrenheit.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B530E-S2K5LS

ManufacturerAllen Bradley
CategoryMotors
Product Line1326 Motors
Part Number1326AB-B530E-S2K5LS
Weight84.00 lbs (38.10 kg)
DescriptionTorque Plus AC Servo Motor
Voltage460 Volts AC
Power Rating4.2 Kilowatts
Rotor Speed3000
Continuous Torque Rating160 pounds on an inch
Continous Stall Current Rating9.5 Amps
Frame size100 millimeters
Magnet stack lenght30 millimeters
Feedback OptionSingle-turn High-resolution
Holding Brake Option24 Volts DC (Spring-set)
Connector OrientationShaft Exit
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B530E-S2K5LS has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B530E-S2K5LS units instead of migration.

Request a Repair

The 1326AB-B530E-S2K5LS Torque Plus AC Servo Motor by Allen-Bradley is a brushless AC synchronous servo motor from the 1326AB high-performance servo motor series designed for the stringent demands of high-performance motion control systems. It features a TENV (Totally Enclosed Non-Ventilated) motor construction, which offers a certain degree of protection from water sprays, and it has a specially designed housing that offers a high torque to size ratio. The 1326AB-B530E-S2K5LS Servo Motor has a voltage rating of 460 Volts AC (with an acceptable voltage range of 380 to 460 Volts AC) and a total output power rating of 4.2 Kilowatts. It has a continuous system torque rating of 160 pounds on an inch and a peak system torque rating of 480 pounds on an inch. The 1326AB-B530E-S2K5LS Servo Motor has a maximum rotor speed of 3000 RPM at 460 Volts AC and a peak system stall current rating of 28.5 Amps.

The 1326AB-B530E-S2K5LS Servo Motor comes with a single-turn type high-resolution feedback device (encoder) that offers absolute position feedback. It also has a 24 Volts DC spring-set brake option with a maximum holding torque rating of 120 pounds on an inch. The 1326AB-B530E-S2K5LS Servo Motor has an approximate frame size of 3.94 inches and a total magnetic stack length of 1.2 inches. It has an IP 65 ingress protection rating and it comes with a factory-installed shaft oil seal that offers dust-tight protection.  The 1326AB-B530E-S2K5LS Servo Motor has an environmentally sealed power and feedback cable and it has a shaft exit connector orientation. This motor has an operating ambient temperature range between 0 and 40 degrees Celsius, and it can be used within a 5% to 95% non-condensing relative humidity range.