Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B530E-S2LS

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B530E-S2LS

|
Need a Specific Revision?

The Allen-Bradley 1326AB-B530E-S2LS servo motor has been designed and manufactured as part of the Bulletin 1326 series as an AC servo motor. Its voltage rating is 460 Volts AC and it supports 4.2 kilowatts of output power and 3000 RPM of motor speed at this voltage rating. The 1326AB-B530E-S2LS AC servo motor is designed with a 3-inch internal magnet stack that reduces its operating inertia. It can operate at an ambient temperature of up to 40 degrees Celsius or 104 degrees Fahrenheit without derating. The 1326AB-B530E-S2LS AC servo motor operates with single-turn high-resolution feedback.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B530E-S2LS

ManufacturerAllen Bradley
CategoryMotors
Product Line1326 Motors
Part Number1326AB-B530E-S2LS
Weight75.00 lbs (34.02 kg)
DescriptionTorque Plus AC Servo Motor
Voltage460 Volts AC
Power Rating4.2 Kilowatts
Rotor Speed3000 RPM
Continuous Torque Rating160 Pounds-inches
Continous Stall Current Rating9.5 Amps
Frame size100 millmeters
Magnet stack lenght30 millimeters
Feedback OptionSingle-turn High-resolution Encoder
Holding Brake Option
Connector OrientationShaft Exit Connector
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B530E-S2LS has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B530E-S2LS units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-B530E-S2LS Torque Plus AC Servo Motor is a high-performance 3-phase brushless AC synchronous servo motor designed for the stringent needs of a wide variety of industrial motion systems. It features a permanent magnet rotor that offers improved servo responses, and it has a housing that is engineered to give higher torque at a reduced motor size. The 1326AB-B530E-S2LS Servo Motor has a nominal 3-phase rating of 460 Volts AC and an input range of 380 Volts AC to 460 Volts AC. It has a rotor speed of 2500 RPM at 380 Volts AC and a max motor speed of 3000 RPM at 460 Volts AC input. The 1326AB-B530E-S2LS Servo Motor has a power output rating of 4 Kilowatts and a motor torque rating of 18.0 Newton-meters. It has a continuous current rating of 9.5 Amps and a peak value of 28.5 Amps.

The 1326AB-B530E-S2LS Servo Motor is designed to be compatible with the Allen-Bradley 1391-07, 50, and 75 controllers and it can be used in the 9/440 CNC System. It has a built-in thermal switch (normally closed type) that offers quick thermal overload indication and it is designed to offer a 100% output torque rating even at a stall. The 1326AB-B530E-S2LS Servo Motor comes with a single-turn high-resolution feedback option that precise and absolute position feedback. It has a built-in shaft oil seal that confers dust-free protection, and it also has an IP 67 standard ingress protection rating that offers temporary water-tight protection when the motor is temporarily immersed in water. The 1326AB-B530E-S2LS Servo Motor has an approximate stator size of 100 millimeters and a maximum magnet stack length of 30 millimeters. It has a shaft-exit connector configuration, and it is shipped with an environmentally sealed feedback and power connector.