Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B720E-21-L

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B720E-21-L

|
Need a Specific Revision?

The 1326AB-B720E-21-L servo motor is a low-inertia permanent magnet servo motor that operates with AC voltage. It has been manufactured by Allen-Bradley/Rockwell Automation in the Bulletin 1326 servo motor series. The 1326AB-B720E-21-L low-inertia servo motor uses permanent magnets both to reduce its inertia and to increase its rated servo response. Its rated motor speed is 3500 RPM at 460 Volts AC. The 1326AB-B720E-21-L low-inertia servo motor can be mounted vertically at any angle with its shaft pointing down or up.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B720E-21-L

ManufacturerAllen Bradley
Product TypeFerrite AC Servo Motor
Product Line1326 Motors
Part Number1326AB-B720E-21-L
Weight111.00 lbs (50.35 kg)
Voltage460 Volts AC, 380 Volts AC
Frame Series194-millimeter frame diameter (215-millimeters bolt center
Motor Length2 inches
Motor Speed460 Volts AC: 3500 rpm, 380 Volts AC: 3000 rpm
Flange and Shaft SeriesIEC metric flange with a keyway
Feedbackresolver-based feedback
Standard OptionsIP 67 environmental rating only for all frame series
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B720E-21-L has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B720E-21-L units instead of migration.

View as PDF
Request a Repair

The 1326AB-B720E-21-L servo motor is a Torque Plus brushless servo motor manufactured by Allen-Bradley. Its speed ratings are 3500 revolutions per minute at 460 Volts AC, 3000 revolutions per minute at 380 Volts AC, 30.9 N-m of torque, 88.1 N-m of peak torque, and 0.015 rotor inertia. Its power rating is 6.8 kilowatts, and the continuous system stall current rating is 17.5 Amps. Its IP 67 rated enclosure provides the protection needed to operate this motor in hazardous environments. The aluminum enclosure is dust-tight and it is able to withstand pulsating water jets without liquid entering the motor because its shaft features a seal kit.

A threaded hole is provided on the face of the 1326AB-B720E-21-L servo motor’s shaft to allow it to be connected to couplings. Its frame diameter is 194 millimeters and the motor is engineered to reduce motor length without any reduction in speed or torque performance. The magnets in this motor are specially designed to increase servo response and the insulation material for its windings is designed to optimize heat transfer to ensure that the motor’s temperature does not exceed its recommended range. Note that the 1326AB-B720E-21-L Torque Plus servo motor loses its IP 67 protection rating when it is used with junction box kits, resolver feedback devices, or blower packages. As a component of the Allen-Bradley 1394 motion system, the 1326AB-B720E-21-L Torque Plus servo motor works with specific axial modules. The mounting flange option on this motor is an IEC metric mounting flange with a keyway that allows it to be mounted vertically at different angles regardless of whether the shaft is facing up or down.

Revision Part #Also known as
1326AB-B720E-21-L Ser A1326AB-B720E-21-L/A, Series A, Rev A
Don't see your particular revision? Contact us now.