1326AB-B720E-21-MK7

The 1326AB-B720E-21-MK7 servo motor is an Allen-Bradley manufactured servo motor that takes AC input voltage from a 3-phase electrical source. The servo motor can perform with a dual voltage rating of 460 Volts AC and 380 Volts AC. The speed rating depends on the input voltage rating. This brushless servo motor is equipped with a feedback device. This device has been certified with the CE, CSA, and UL standards. The 1326AB-B720E-21-MK7 servo motor is widely used in position control. The installation area of the servo motor should be free from all traces of electromagnetic noise. The airflow between the nearest ventilation source and the servo motor should not be obstructed. Any heat-generating device should not be kept near the servo motor. The body of the motor has a 215-millimeter bolt center and the stainless-steel body of the motor is housed inside a 194-millimeter frame. By using the IEC metric flange, the motor can be mounted in different industrial locations. The drive has the ability to operate in harsh environmental conditions because it has been certified with an IP 67 protection rating.

The 1326AB-B720E-21-MK7 servo motor makes use of ferrite magnets for increasing its performance. The servo motor consists of a servo motor and a controller which drives the servo motor and they are connected to each other by using cables. A spring-enabled holding brake is equipped in the servo motor as a holding brake. This brake is released after the voltage has been applied to the brake coil. The 1326AB-B720E-21-MK7 servo motor has been manufactured for factory use only. A NEMA/IEC metric flange with a keyway is available in this servo motor model. A multi-turn high-resolution feedback encoder is available in the servo motor to transfer the feedback from the current inputs. Quick decisions can be made based on the feedback sent by the servo motor’s encoder to the users.