Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B720E-21-ML

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B720E-21-ML

|

The 1326AB-B720E-21-ML servo motor is an Allen-Bradley/Rockwell Automation Bulletin 1326 series servo motor. It has a multi-turn and high-resolution type of encoder for providing feedback and an IEC/metric type of flange with a keyway. The 1326AB-B720E-21-ML servo motor fits into a Size 7 frame with a frame diameter of 149 millimeters and it has an IP 67 environmental protection rating. This servo motor supports 6.8 kilowatts of output power and 3500 RPM of rated motor speed at a voltage rating of 460 Volts AC. The 1326AB-B720E-21-ML servo motor can operate without derating at a maximum temperature rating of 40 degrees Celsius or 104 degrees Fahrenheit.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B720E-21-ML

ManufacturerAllen Bradley
Product TypeServo Motor
Product Line1326 Motors
Part Number1326AB-B720E-21-ML
Weight102.00 lbs (46.27 kg)
Voltage460/380V AC
Frame Diameter194 mm
Rated Motor Speed3500 rpm
Flange and Shaft SeriesIEC Metric Flange with Keyway
Motor Rated Torque30.9 Nm
Motor Rated Output6.8 kW
System Continuous Torque30.9 Nm
System Peak Stall Torque88.1 Nm
Standard OptionIP67 Environmental Rating
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B720E-21-ML has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B720E-21-ML units instead of migration.

The 1326AB-B720E-21-ML is a ferrite AC Servo Motor from the Torque Plus series, manufactured by the Allen Bradley branch of Rockwell Automation to meet the needs of motion systems with high performance. The housing of this three-phase motor is made of aluminum for better heat transfer, and it is specially designed to simultaneously reduce the length of the motor, which is around 20 inches (508 millimeters), and increase the ratings of continuous torque (it has a motor and system continuous torque of 30.9 N-m). This synchronous brushless module, the 1326AB-B720E-21-ML, has a voltage of 460 to 380 Volts AC and is engineered to be used in combination with the Allen-Bradley 1394 Motion Control System. The rating of the output torque of the motor at the stall is zero RPM (100% continuous torque). The 1326AB-B720E-21-ML weighs 46.3 kilograms (102 pounds), and the diameter of the frame of the motor is 194 millimeters (215 millimeters bolt center). This motor can achieve a speed of 3500 RPM, and it has an IP67 Environmental Rating which protects the motor from a temporary immersion in water. The 1326AB-B720E-21-ML can be mounted vertically and at any angle, and the IEC Metric Flange shaft with a Keyway can be turned up or down; its position will not affect the operation of the motor.

This servo motor comes with an onboard EEPROM memory and is available with a high-resolution encoder feedback device in multi-turn configurations. This aforementioned memory is used to store information about motor configuration. The multi-turn configuration means that re-homing of the machine on power-up is eliminated thanks to accurate machine positions over multiple revolutions. It is important to note that the motor comes with a pre-installed shaft oil seal, and it loses the IP67 rating if either a junction box kit option or an encoder package, which is mounted externally, are used. The user needs to makes sure that the ambient temperature does not exceed 40 degrees Celsius (104 degrees Fahrenheit), otherwise the 1326AB-B720E-21-ML might deteriorate.

Revision Part #Also known as
1326AB-B720E-21-ML Ser A1326AB-B720E-21-ML/A, Series A, Rev A
Don't see your particular revision? Contact us now.