Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B720E-M2K7LS

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B720E-M2K7LS

|
Need a Specific Revision?

The Allen-Bradley 1326AB-B720E-M2K7LS servo motor is a Bulletin 1326 series AC servo motor. Its motor voltage rating is 460 Volts AC and it can support a maximum motor speed rating of 3500 RPM and a maximum output rating of 6.8 kilowatts. The 1326AB-B720E-M2K7LS AC servo motor operates with feedback that is provided by a multi-turn encoder with high resolution. This servo motor comes with a built-in holding brake that has a DC coil. The 1326AB-B720E-M2K7LS AC servo motor’s holding brake has a coil voltage rating of 24 Volts DC and a torque rating of 41 N-m.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B720E-M2K7LS

ManufacturerAllen Bradley
CategoryMotors
Product Line1326 Motors
Part Number1326AB-B720E-M2K7LS
Weight65.00 lbs (29.48 kg)
DescriptionTorque Plus AC Servo Motor
Voltage460 Volts AC
Power Rating6.2 Kilowatts
Rotor Speed3000 RPM
Continuous Torque Rating273 Pounds-inches
Continous Stall Current Rating17.5 Amps
Frame size150 millimeters
Magnet stack lenght20 millimeters
Feedback DeviceMulti-turn High-resolution Encoder
Holding Brake Option24 Volt DC (Spring-set)
Connector OrientationShaft Exit Connectors
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B720E-M2K7LS has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B720E-M2K7LS units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-B720E-M2K7LS Torque Plus AC Servo Motor is a high-performance servo motor from the 1326AB motor series that is designed to meet the needs of high-performance motion control systems. The 1326AB-B720E-M2K7LS Servo Motor comes with an integral Normally Closed (N.C.) thermal switch that detects thermal overload, and it has a special permanent magnet rotor that offers low-cost, improved servo response. The 1326AB-B720E-M2K7LS Servo Motor has a 3-phase 460 Volts AC voltage rating and an acceptable input range between 380 Volts AC and 460 Volts AC. It has an output rating of 6.8 Kilowatts and a continuous torque rating of 273 pounds on an inch. The 1326AB-B720E-M2K7LS Servo Motor also has a peak torque rating of 780 pounds on an inch and a maximum motor speed of 3000 Revolutions Per Minute (RPM).

The 1326AB-B720E-M2K7LS Servo Motor has a built-in multi-turn high-resolution encoder that provides absolute position feedback with the use of a battery and a 24 Volts DC holding brake (spring-set) with a 45.2 Newton-meter holding brake torque. It has a maximum frame size of 150 millimeters and 20 millimeters approximate stack length. The 1326AB-B720E-M2K7LS Servo Motor has an integral shaft oil seal, which confers dust-tight protection, and it requires no additional shaft-seal kit. It has a standard IP 67 ingress protection rating and a TENV design. The 1326AB-B720E-M2K7LS Servo Motor comes with sealed feedback and power connector cables, and it supports the shaft exit connector type. The 1326AB-B720E-M2K7LS Servo Motor weighs approximately 46.3 Kilograms, and it has a factory rated operating temperature range of 0 to 40 degrees Celsius. The 1326AB-B720E-M2K7LS Servo Motor is designed for 5 to 95% non-condensing relative humidity, and it is designed to withstand 10 g peak shock for 6 milliseconds duration.