Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-B730E-21-A

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-B730E-21-A

|
Need a Specific Revision?

The Allen-Bradley 1326AB-B730E-21-A servo motor is a synchronous AC servo motor rated for 3350 RPM shaft speed at 460 Volts AC input voltage. The 1326AB-B730E-21-A servo motor belongs to 1326AB series from Allen-Bradley which is designed for applications such as automotive, machine tool, and packaging applications which require smooth performance and high continuous output.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-B730E-21-A

ManufacturerAllen Bradley
Product typeAC servo motor
Product Line1326 Motors
Part Number1326AB-B730E-21-A
Weight32.00 lbs (14.51 kg)
Rated speed3350 RPM
Frame diameter194 millimeters
Magnet stack length30 millimeters
EnclosureIP67
Rated power output9.6 kilowatts
Torque39 N-m
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-B730E-21-A has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B730E-21-A units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-B730E-21-A servo motor is a synchronous AC motor rated for 3350 RPM shaft speed at 460 Volts AC input voltage. The 1326AB-B730E-21-A servo motor belongs to the 1326AB series from Allen-Bradley which is designed for applications such as automotive, machine tool, and packaging applications which require smooth performance and high continuous output. The motor is made using special flux profile permanent magnets which enable increased servo response. With a 194-millimeter frame diameter and a 30-millimeter magnet stack length, the 1326AB-B730E-21-A servo motor meets the requirements of high-performance motion systems. The motor enclosure is IP 67 rated and it comes in extruded aluminum housing for improved heat transfer. The motor can be mounted vertically at any angle with the shaft pointing down or up.

The rated shaft speeds for the 1326AB-B730E-21-A servo motor are 3350 and 2800 RPM at 460 and 380 Volts AC, respectively. The rated power output for the motor is 9.6 kilowatts. The motor is designed to be used at a maximum ambient temperature of 40 degrees Celsius. At high temperatures, the motor output will derate. The thermal time constant for the motor is 60 minutes. The 1326AB-B730E-21-A servo motor can be used with two Allen-Bradley 1394 series axis modules: the AM75 and AM50 modules. The continuous and peak stall torque with the AM50 module is 39 N-m and 56.8 N-m with the AM75 module. The continuous and peak stall current with the AM50 module is 22.8 Amps and 33.2 Amps. The continuous and peak stall torque with the AM75 module is 39 N-m and it is 85.4 N-m The continuous and peak stall current with the AM75 module is 22.8 Amps and it is 50 Amps. The weight of the 1326AB-B730E-21-A servo motor is 62.6 kilograms.