1326AB-C2C11K7

The 1326AB-C2C11K7 is an Allen-Bradley servo motor. This servo motor has a max. operating speed of 2000 rpm. It also has a frame diameter of 194mm. Its rated motor speed is also 2000 rpm. In addition to these features, it also has an inch combination face/flange with keyway.  Its motor rated torque is 23.7 Nm. Its motor rated output, on the other hand, is 3.5 kW. This motor’s continuous torque is 23.7 Nm. Its system peak stall torque is 47.5 Nm. It does not have any option that is standard. It is engineered with a closure which is unique and aids it in reducing the motor length while increasing the continuous torque rating.

The 1326AB-C2C11K7 has a brushless, AC three-phase synchronization motor with is high-performance. This enables it to counter the high-performance motion systems that have stringent requirements. This motor is made to be used with motion control systems. It has a sinusoidal wound stator field which aids in this device’s smooth operation when it is being used at a low speed. The special flux profile permanent magnet that it contains also enables it to increase its response. The TENV construction in this device can be installed alongside the optional shaft seal.

The 1326AB-C2C11K7 is manufactured with an extruded aluminum casing which increases and enhances its rate of transferring heat. When it is at a stall, the 1326AB-C2C11K7 has a continuous rated output torque of 100%. The insulation type that this system has is UL-listed. When mounting this servo motor, operators can mount it vertically at any angle with the shaft either up or down. It also has in it a thermal switch that is closed. This is contained in the motor’s winding and it is instrumental in giving a thermal overload indication. The threaded hole on the shaft’s surface aids in securing couplings.