Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-C2E-11

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-C2E-11

|
Need a Specific Revision?

The Allen-Bradley 1326AB-C2E-11 servo motor is a permanent magnet AC servo motor. The frame diameter of the motor is 7.63 inches and the motor stack length is 2. The maximum operating speed of the servo motor is 3000 RPM. The 1326AB-C2E-11 servo motor comes with an inch combination face/flange with a keyway. It is part of the 1326AB servo motor range which are high-performance synchronous servo motors which can be used with the 1391 AC servo controllers.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-C2E-11

ManufacturerAllen Bradley
Product typeAC servo motor
Product Line1326 Motors
Part Number1326AB-C2E-11
UPC662453007656
Weight99.00 lbs (44.91 kg)
Rated speed3000 RPM
Frame diameter7.63 inches
Continuous stall torque210 lb-in
Peak stall torque420 lb-in
Rated output5.2 kilowatts
Continuous stall current33.2 Amps
Peak stall current66.4 Amps
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-C2E-11 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-C2E-11 units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-C2E-11 servo motor is a permanent magnet AC servo motor. The frame diameter of the motor is 7.63 inches and the motor stack length is 2. The maximum operating speed of the motor is 3000 RPM. The 1326AB-C2E-11 servo motor comes with an inch combination face/flange with a keyway. It is part of the 1326AB servo motor range which are high-performance synchronous servo motors that can be used with the 1391 series AC servo controllers. Several options are available for the 1326AB series servo motors, including holding brakes, a brake power supply, shaft seal kits, resolver feedback kits, and junction box kits. The 1326AB servo motors support three-phase input, they have a TENV construction, and they can be mounted with the shaft vertically and pointing up or down.

The continuous stall torque for the 1326AB-C2E-11 servo motor at 40 degrees Celsius ambient temperature is 210 pounds on an inch. The rated power output is 5.2 kilowatts. The peak stall torque for the motor is 420 pounds on an inch. The continuous and peak stall current ratings are 33.2 Amps and 66.4 Amps, respectively. Thermal specifications include insulation Class H, a thermal time constant of 71 minute,s and peak ambient temperature of 40 degrees Celsius (without derating). The inductance of the motor winding is 1.5 Millihenry. The terminal resistance of the motor winding and torque constant is 0.088 ohms and 7.44 pounds on an inch, respectively. The mechanical specifications of the 1326AB-C2E-11 servo motor include 0.140 lb-in.s2 rotor polar moment of inertia and 102 pounds of motor weight. The motor enclosure is IP 65 rated and the motor is dust-tight and it can withstand pulsating water jets without suffering damage. The IP 65 rating is lost when an externally mounted encoder/resolver feedback package is used.