Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1326 Motors 1326AB-C2E-11-K7

Product image is representative; revision or series may vary. Contact us to request a specific version.

1326AB-C2E-11-K7

|
Need a Specific Revision?

The Allen-Bradley 1326AB-C2E-11-K7 servo motor is a high-performance three-phase servo motor. It can be used with the Allen-Bradley 1391 AC servo controllers. Amplifiers can also be used with the servo motor. The 1326AB-C2E-11-K7 servo motor includes a 400 pounds on an inch rated holding brake with a 24 Volts DC coil. The frame diameter of the motor is 7.63 inches. The standard motor rated speed is 3000 RPM which improves to 4000 RPM with an Allen-Bradley 1391B-AA45 servo amplifier.  The rated output power of the motor is 5.2 kilowatts.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1326AB-C2E-11-K7

ManufacturerAllen Bradley
Product typeAC servo motor
Product Line1326 Motors
Part Number1326AB-C2E-11-K7
Weight108.00 lbs (48.99 kg)
Rated speed3000 RPM
Speed with amplification4000 RPM
Compatible amplifier1391B-AA45
Rated output power5.2 kilowatts
Continuous stall torque210 lb-in
Rotor polar moment of inertia0.140 lb-in.s2
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1326AB-C2E-11-K7 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-C2E-11-K7 units instead of migration.

Request a Repair

The Allen-Bradley 1326AB-C2E-11-K7 servo motor is a high-performance three-phase servo motor. It can be used with the Allen-Bradley 1391 AC servo controllers. Amplifiers can also be used with the servo motor. The 1326AB-C2E-11-K7 servo motor is part of the 1326AB series from Allen-Bradley which has standard rotor speeds ranging from 1600 RPM to 5000 RPM and a peak stall torque ranging from 840 pounds on an inch to 48 pounds on an inch. With amplification, the speed range extends from 2000 RPM to 6000 RPM and the peak stall torque range extends from 989 pounds on an inch to 48 pounds on an inch. Allen-Bradley provides the following options for this motor series: holding brakes, NEMA or IEC rated flange mounts, and a shaft seal kit.

The 1326AB-C2E-11-K7 servo motor includes a 400 pounds on an inch rated holding brake with a 24 Volts DC rated coil. The frame diameter of the motor is 7.63 inches. The standard motor rated speed is 3000 RPM which improves to 4000 RPM with a 1391B-AA45 servo amplifier. The rated output power of the motor is 5.2 kilowatts. The stator on the motor is a three-phase sinusoidal wound rotor which improves operation at low speeds. The motor winding has a torque constant of 7.44 pounds on an inch, an inductance of 1.5 Millihenry, and a terminal resistance rating of 0.088 ohms at 25 degrees Celsius. The performance specifications for the motor include a mechanical time constant of 5.3 milliseconds, 210 pounds on an inch of continuous stall torque (at 40 degrees Celsius), 420 pounds on an inch of peak stall torque, and continuous and peak stall current ratings of 33.2 and 66.4 Amps, respectively. The motor weight is 102 pounds and the rotor polar moment of inertia is 0.140 lb-in.s2.