1326AB-C3E-11-K7

The Allen-Bradley 1326AB-C3E-11-K7 is a high-performance AC servo motor. It is a three-phase, brushless AC synchronous servo motor designed by Allen-Bradley to enable high speeds and precise positioning in industrial automation applications. The motor has a 194-millimeter frame diameter, and a 35 N-m system continuous torque. The motor output power is 10 kW. It works with speeds of up to 3000 RPM. The motor design includes rotor permanent magnets, an IP65 rated housing, and a TENV construction for better heat transfer. A resolver is integrated for positioning feedback information.

The Allen-Bradley 1326AB-C3E-11-K7 can be installed horizontally or vertically. It has a normally closed thermal switch integrated inside the housing (115 Volts AC at 1 Amps rated or 24 Volts DC at 1 Amps rated). This switch can send information of thermal overload to the controller. This model has a 400 pounds on an inch (45.2 N-m) holding brake with a 24 Volts DC coil. The brake is designed only to hold a load at a standstill and it is not recommended to be used for emergency stopping. The motor is mounted over an inch combination face (a flange with a keyway).

Users are advised to pair this AC servo motor with the Allen-Bradley 1391B-AA45 servo amplifier. The 1326AB-C3E-11-K7 can work in dusty surroundings and its internal temperatures can go up to 155 degrees Celsius (311 degrees Fahrenheit) but the surrounding ambient temperature must be kept below 40 degrees Celsius (104 degrees Fahrenheit). The 1326AB-C3E-11-K7 can withstand solid shocks and vibrations. This high-performance AC servo motor has enclosure dimensions of 557 millimeters x 194 millimeters x 194 millimeters (21.94 inches x 7.63 inches x 7.63 inches). This item weighs 138 pounds (62.6 kilograms).