1326DP-I3D

The servo motor with the product code 1326DP-I3D is part of the Bulletin 1326 series by Allen-Bradley/Rockwell Automation and it comes with an integral tachometer. This servo motor is used within the Allen-Bradley 1388 servo system, which consists of a servo controller, servo motor, and isolation transformer. The 1388 servo controllers include components like a logic control board, shunt regulator circuit, power amplifier, logic power supply, and dynamic braking resistor. All components from the 1388 and 1326 series are made for an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and a humidity range of 5 to 95% (non-condensing). The 1326DP-I3D servo motor has permanent magnets and it is the PM motor type. The adjustments and setup of the motor can be handled easily through the controller.

The 1326DP-I3D servo motor has a frame size of I and a motor stack/frame length of 3. The motor is designed for DC voltage operation and it has a shaft of 5/8 inches. The full load current of the motor is 11.2 Amps while its Tach voltage is 152.4 Volts. The 1326DP-I3D servo motor is tested and certified for industrial use but it requires appropriate protection when it is stored. The motor should be installed in a dust-free area and it includes oil seals in order to prevent liquid contamination. The only part which is not oil resistant is the shaft extension. The 1326DP-I3D servo motor is mounted with a combined type C/D flange mount thus providing over-bolt and direct bolt mounting options. Standard equipment included with the 1326 servo motor includes a thermal overload detector that ensures that armature winding temperature level is right.