1494V-DH666-A

The 1494V-DH666-A disconnect switch kit is a Type H, 3-pole disconnect switch kit that is manufactured by Allen-Bradley. This Allen-Bradley disconnect switch kit comes with several safety and protective features that make its installation and use safer and easier than the equivalent processes in other switch kits. The Allen-Bradley 1494V-DH666-A disconnect switch kit comes with visible blades. In addition to that, the kit also comes with a line-side shield that is useful in areas with power connections. This switch kit also has protective covers for both the fuses and the load wires which reduce the risk of electrocution. The handle, switch, and mechanism are always connected, and this is true even when the enclosure door has been opened. The Allen-Bradley 1494V-DH666-A disconnect switch kit comes with an easy-to-use template, which will significantly reduce the panel layout time.

The users should make sure that the NFPA 70 requirements are followed during installation. The kit should not be connected to any power source during installation or servicing. Also, the users should not try to repair this disconnect switch kit if it is damaged or it starts to malfunction. Damaged kits should be replaced. It is important to follow all the above-stipulated procedures because they have a big impact on the proper operation of the 1494V-DH666-A disconnect switch kit and handle. Failing to follow them can lead to the damage or malfunctioning of the kit, or even to severe injuries or death to the users. To install the Allen-Bradley 1494V-DH666-A disconnect switch kit, the users will need the following tools: a ½-inch socket, a 5/16-inch Allen wrench, a center punch, hammer, a flat-head screwdriver, a file, a Philips screwdriver, a hacksaw, needlenose pliers, and a 9/32-inch drill bit.