The 190S-CND2-DC16C starter is an Allen-Bradley combination starter device with a circuit breaker. It is a DOL starter with an MPCB. It comes with a contactor size of 100-C16. It is built with an open enclosure and it is not water resistant. Water sprays and splashes should be strictly avoided around this starter/breaker device. The 190S-CND2-DC16C starter runs with a voltage rating of 110 Volts AC with frequency of 50 Hertz and a voltage of 120 Volts AC with 60 Hertz frequency. It uses a single 190S variant auxiliary contact. The attached circuit breaker of the starter has a D frame. The circuit breaker current range is in between 10 and 16 Amps. The circuit breaker comes with single auxiliary and trip contact. It is certified with the IEC, EN, and cULus standards.
The 190S-CND2-DC16C starter comes with short circuit coordination Types 1 and 2 according to the IEC standards. The starter device comes with an auxiliary contact wired to the terminal bock at the bottom of the starter assembly. It can be mounted using screws. The circuit breaker system protects electrical motors from unstable current. The breaker shuts down the circuitry when it detects an unstable current. A lock and rotate knob is present on the front side of the starter to switch between settings. The 190S-CND2-DC16C starter comes with variable power ratings for different voltage ranges. The circuit breaker provides Class 10 protection. A dial is present which can be rotated to change the current rating of the starter. A push-to-test button is present to check the breaker functionality of the MCB manually.
Repair Services for 190S-CND2-DC16C
||$316.29||Add to Cart |
Our highly skilled technicians can repair your 190S-CND2-DC16C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.