The 190S-END3-FC25C starter is a Series B starter device from Allen-Bradley. It is combined with an Allen-Bradley 140M series circuit breaker to form a complete and safe device. This starter variant uses the 100-C30 contactor and it comes with an open enclosure. It is a 3-phase device and it is also equipped with 3 poles. The 190S-END3-FC25C starter is used to control and reduce the consumption of the input power supply by the electric motor. It is built with 1 normally open and 1 normally closed contact auxiliary point on the front side. The current rating of the starter ranges between 18 and 25 Amps. The voltage rating is 110 to 120 Volts AC for 50 to 60 Hertz frequency.
Mounting is available on the back side of the 190S-END3-FC25C starter. The attached circuit breaker protects motors from unstable and overload current conditions and shuts down the circuit. The circuit breaker is certified with the EN, IEC, and CE standards. It also meets all the specifications for the EMC requirements. The breaker functionality works for currents of up to 100 Amps. It provides Class 10 protection, which means that the breaker will be able to trip the circuit within 10 seconds or less. The front side of the 190S-END3-FC25C starter has a lockable twist knob which is used to change the mode selection of the starter. The conformally coated body of the starter uses an open enclosure. No IP rating for dust and water resistance is available with the starter. The starter device is mostly used in water supply pumps and manufacturing plants. The 190S-END3-FC25C starter comes with an output power rating of 20 Horsepower.
Repair Services for 190S-END3-FC25C
||Ask|| Get Quote |
Our highly skilled technicians can repair your 190S-END3-FC25C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.