The 190S-ENZJ3-FC32C starter is an Allen-Bradley DOL starter attached with an MPCB device. The combination controller device uses a contactor size of 100-C30. The starter device is a compact and ready-to-use device that is widely used in industries to take control of different motors and devices. The primary purpose of a starter device like this is to control the flow of power into the host device. This helps to reduce the cost and promote the long-term health of the device. The attached circuit breaker ensures the protection of device against unstable current conditions. An open enclosure which is conformally coated houses the components of the combination controller. No IP rating is available for controller. It should be protected from water sprays and splashes with an enclosure. The 190S-ENZJ3-FC32C starter is equipped with a 24 Volts DC diode. It comes with 2 contactor auxiliary contacts.
The 190S-ENZJ3-FC32C starter uses circuit breaker with a current rating between 25 and 32 Amps. This direct on line starter device has a power rating of 15 kilowatts. The controller has a max fuse size of 600 volts. It comes with different power rating for different voltage rating with different frequency. The adjustable motor current range falls in between 23 and 30 Amps. The overload relay current rating of the controller is in between 23 and 32 Amps. It uses the Type 1 short circuit coordination. A rotating knob is present on the front side to select different modes. The 190S-ENZJ3-FC32C starter can be mounted by using screws. The body has a conformal coating to protect it against different environment conditions.
Repair Services for 190S-ENZJ3-FC32C
||$430.08||Add to Cart |
Our highly skilled technicians can repair your 190S-ENZJ3-FC32C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.