The Allen-Bradley 190S-FNDJ3-FC32C starter is an industrial plug and play solution. It is compact in size and it is a combination of starter and circuit breaker solutions. The starter downsizes the power supply and it reduces the wear and tear on devices. A circuit breaker is used to protect the system from an unstable current supply. This starter variant come with an integrated diode rated at 24 Volts DC. The MCS compact starter device has a current rating of 23 to 32 Amps. It is a Series B device and it is listed with the EN and IEC standards. It uses a 100-C37 contactor and it operates with a voltage of 110 to 120 Volts AC with frequency of 50 to 60 Hertz. The circuit breaker that is attached has a current breaker range between 25 and 32 Amps. It comes with 1 normally open and 1 normally closed auxiliary contact.
The 190S-FNDJ3-FC32C starter is a manual self-started combination motor controller device made for the industrial sector. A lockable twist knob is present in the controller for switching to different modes. The 190S-FNDJ3-FC32C starter is suitable for group installation with a maximum of 600 Amps. It comes with 3 poles and it can control 3 separate motors at a time. The controller uses a 75 degrees Celsius rated copper wire only for connection purposes. During the installation, the 190S-FNDJ3-FC32C starter should be fully disconnected from the power to avoid electrical accidents. It is easy to set up and install the controller because it is compact and can be installed in different locations. For proper temperature control, the airflow should not be obstructed between the controller and the nearest ventilation source.
Repair Services for 190S-FNDJ3-FC32C
||$336.36||Add to Cart |
Our highly skilled technicians can repair your 190S-FNDJ3-FC32C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.