2090-CFBM4E2-CATR

The 2090-CFBM4E2-CATR is a Feedback transition cable that is part of the Kinetix Rotary and linear motion control platform of Allen-Bradley. This cable comes with a Threaded DIN connector (M4) on the motor end and a bayonet receptacle (E2) for mating with the existing bayonet cable. This cable measures 500 mm (19.7 in.). The 2090-CFBM4E2-CATR is compatible for use with MPL-A3xxx, MPL-A4xxx, MPL-A45xxx, MPL-A5xxx Kinetix MPL 200V-class motors; MPL-B3xxx, MPL-B4xxx, MPL-B45xxx, MPL-B520, MPL-B540, MPL-B560, MPL-B580, MPL-B6xxx, MPL-B860D, MPL-B880C, MPL-B960B, MPL-B960C, MPL-B980B, MPL-B960D, MPL-B980C, MPL-B980D Kinetix MPM 400V class servo motors. The 2090-CFBM4E2-CATR may also be used with MPM-A115xxx, MPM-A1302F, MPM-A1304F, MPM-A1651F, MPM-A1652F, MPM-A1653F, MPM-A2152F, MPM-A2153F, MPM-A2154C, MPM-A2154E Kinetix MPM 200V class servo motors; MPM-B115xxx, MPM-B1302F, MPM-B130xx, MPM-B1651C, MPM-B1651F, MPM-B1652C, MPM-B1653C, MPM-B1651M, MPM-B1652E, MPM-B1652F, MPM-B1653E, MPM-B2152C, MPM-B2153B, MPM-B1653F, MPM-B2152F, MPM-B2152M MPM-B2153E, MPM-B2153F, MPM-B2154B, MPM-B2154E, and MPM-B2154F Kinetix MPM 400V class servo motors. The 2090-CFBM4E2-CATR has a black-colored cable jacket made from industrial Thermoplastic Elastomer (TPE) with a maximum voltage rating of 300 V. This cable has a diameter of 9.6 mm or 0.38 inches with a static bend radius requirement of 67.2 mm or 2.6 inches. Recommended cable bend must start at a minimum cable distance of 67.2 mm or 2.6 inches from the end of each of the cable’s receptacles. The cable’s M4 Motor end receptacle measures 58 mm or 2.3 inches in length and a diameter of 25.8 mm or 1.0 inches. The opposite end of the cable which is the drive end connector measures 90 mm or 3.5 mm with a height of 31 mm or 1.2 inches.

The 2090-CFBM4E2-CATR cable is a 2090 series feedback transition cable. It is manufactured by Allen-Bradley and it is part of the Kinetix motion accessories product line. The total length of the cable is 19.7 inches. The diameter of the cable is 0.38 inches. At either end of the cable are 2 connectors: a threaded DIN connector (M4) is attached to one end of the cable and a bayonet receptacle (E2) is attached to the other end of the cable for mating with the existing bayonet cable. The length of the threaded DIN connector is 2.3 inches and the length of the bayonet receptacle is 3.5 inches. The voltage rating of the 2090-CFBM4E2-CATR cable is 300 Volts. The static bend radius of the 2090-CFBM4E2-CATR cable is 2.6 inches. The 2090-CFBM4E2-CATR cable is designed to connect Kinetix MPL servo motors to servo drives. The 2090-CFBM4E2-CATR cable can be used with a wide range of MPL motors, including motors rated for 200 Volts and motors rated for 400 Volts. The 2090-CFBM4E2-CATR cable can be used with a wide range of MPM motors including motors rated for 200 Volts and motors rated for 400 Volts. The drive end of the 2090-CFBM4E2-CATR cable has a bayonet receptacle and the motor end of the cable has a threaded DIN connector.