2090-CPWM7DF-16AA40

The 2090-CPWM7DF-16AA40 is a Power only cable from the Kinetix rotary and linear motion series of Allen-Bradley. This cable is a standard, non-flex cable that is used to establish a connection between the motor and the drive. It has an M7 SpeedTec connector on the motor end and flying leads for connection to the drive end. The 2090-CPWM7DF-16AA40 is a SpeedTec cable that provides a quick and secure connection of the servo motor to the drive. This cable securely locks into places by turning the receptacle to the male mating interface provided to the motor. This power-only cable also provides a shock-resistant and vibration-resistant connection. The 2090-CPWM7DF-16AA40 standard, non-flex cable has a cable diameter of 16 AWG, and a cable diameter of 9.20 mm (0.36 in). The M7 connector comes with 9 pin connectors labeled A, B, C, D, F, G, H, I, and J with the D pin connector being the ground terminal. It has a patterned, notched receptacle that prevents improper connection. The internal wires within the cable are color Brown, Black, Blue, and Green/Yellow striped wire. Cable Pin A is internally connected to the Brown wire; B to Black wire; C to Blue wire and D to the Green/Yellow wire. The connector backshell is shielded 360 degrees. The 2090-CPWM7DF-16AA40 static bend radius is 64.4 mm (2.5 in) 7x of the motor cable diameter. This is recommended to be followed when routing the cable. The bending area specifies the allowable cable bend without risking cable damage and wire damage.

The 2090-CPWM7DF-16AA40 cable is a SpeedTEC cable manufactured by Allen-Bradley as part of the 2090 series of power and feedback cables. This cable is a motor power-only cable and it has a SpeedTec DIN connector as its motor-end connector. It also has a drive-end flying-lead drive-end connector type, and it features a wire gauge of 16 AWG which applies to the power cables. The Allen-Bradley 2090-CPWM7DF-16AA40 SpeedTEC cable is a standard, non-flex type of cable generally, and there is a wide range of motor and actuator cables that have rugged DIN connectors and they are suitable for the connection to a motion control system. The 2090 series standard non-flex motor power cables and feedback cables are designed for all the Allen-Bradley actuators and servo motors. Additionally, there are continuous-flex rated cables that are best for use with moving applications and there are standard non-flex transition cables and continuous flex extension cables which are ideal for different applications. Some of the features of the Allen-Bradley 2090 series 2090-CPWM7DF-16AA40 SpeedTEC cable include compliance to the NFPA 79 standards and a UL listing. The 2090-CPWM7DF-16AA40 SpeedTEC cable is a bulk cable with an insulation rating of 600 Volts that is intended for use with the cable trays as well as with exposed run applications. Other notable features of this type of cable include comprehensive accessories that optimize the use of the cables in different machines. The continuous flex cables are best for use in applications with about 20 million flex cycles. These Allen-Bradley cables belong to the servo system Declaration of Conformity (DoC) from Allen-Bradley/Rockwell Automation. The SpeedTEC connection system is designed to meet the demands for quick connections with positive metallic keying.