Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 2090 Cables 2090-UXNBMP-18S60

Product image is representative; revision or series may vary. Contact us to request a specific version.

2090-UXNBMP-18S60

|
Need a Specific Revision?

The 2090-UXNBMP-18S60 brake cable is a standard, non-flexing motor brake cable manufactured by Allen-Bradley/Rockwell Automation. It has a 600 Volts voltage rating, it is 60 meters long, and it has the 18 AWG wire size and a black cable jacket.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2090-UXNBMP-18S60

ManufacturerAllen Bradley
CategoryMotors
Product Line2090 Cables
Part Number2090-UXNBMP-18S60
UPC662453974309
Weight9.00 lbs (4.08 kg)
Product DescriptionMotor Brake Cable
Connector TypeFlying-leads at drive, Bayonet Connector
Motor ConnectorStraight
Flex OptionStandard, Non-flex
Voltage Rating600 Volts
Cable length60 meters
Wire Size18 AWG
SeriesA
Cable Jacket ColorBlack
CompatibilityMP-Series, 1326AB-Series
Request a Repair

The 2090-UXNBMP-18S60 brake cable is a non-flex motor brake cable that is available from Allen-Bradley/Rockwell Automation. It is made out of industrial grade thermoplastic elastomer with straight motor connectors. The length of the cable is 60 meters and the wire size is 18 AWG. This Series A servo motor brake cable can be used with servo motors from the 1326AB series of servo motors and the MP series of servo motors. It comes with a black cable jacket, a bayonet connector at the motor side, and a flying lead connector at the drive side. This cable is a type of a power cable with a 600 Volts voltage rating. The 2090-UXNBMP-18S60 brake cable provides the required sealing for achieving shield termination and environmental ratings.

The Allen-Bradley 2090-UXNBMP-18S60 brake cable is UL listed and CSA certified to meet industrial standards. The black and white wires of the brake cable must be connected to Pins 43 and 44 of the CN1 connector of the drive control interface. The BR- and BR+ brake ports of the MPL-B, MPG-B, or the 1326AB (M2L/S2L) servo motors must be connected to the black and white wires of the brake cable, respectively. This brake cable is designed to be used with Kinetix drive systems and it is intended for static applications. The overall features of the cable deliver excellent EMC/EMI performance. It is included in the Servo System Declaration of Conformity (DoC) from Allen-Bradley/Rockwell Automation. The 2090-UXNBMP-18S60 brake cable has high-quality insulation that ensures a long service life. During installation, make sure to check whether the cable connector is properly plugged in and locked. This cable is the best suited for non-flexing industrial motion control applications.