2090-UXNPBMP-10S15

The 2090-UXNPBMP-10S15 power cable is a Series A, standard, non-flex power cable from Allen-Bradley/Rockwell Automation. It has been designed and tested to work with motion control applications and it is suitable for non-flexing applications. Some of the features of this cable include straight motor connectors, a non-flexible cable, and a black cable jacket. It can be easily assembled without any wiring errors. The 2090-UXNPBMP-10S15 Series A power cable comes with 460 Volts of voltage rating, a 15-meter cable length, and an 8 AWG wire size. For easy connection, the cable has flying lead at the drive end and bayonet connector at the motor end. Use a connector kit or breakout components for the drive end terminations.

The 2090-UXNPBMP-10S15 power cable is an excellent power solution for connecting servo motors to drives. The insulation of the cable has a lower operating and shield capacitance than the traditional motor power supply cables. The conductors inside the cable are large enough to withstand motor load currents. The cable has enough insulation to prevent voltage peaks from causing damage to the cable. The 2090-UXNPBMP-10S15 power cable is designed for use with the 2098-IPD-075, 100, 150, 220, HV100, HV150, and HV220 drives. It is also compatibile with the MP-series and 1326AB-series servo motors. The power cable connectors must not be disconnected or reconnected as long as voltage is present. The proper pin arrangement of the power cable is connecting the green/yellow, blue, black, and brown wires of the cable to the GND, W, V, and U ports of the motor and drive. If the excess cable cannot be trimmed, it should be laid in an "S" shape or figure-eight pattern. This cable is developed for fixed and high-performance applications such as material handling and converting applications.