2090-UXNPBMP-8S30

The Allen-Bradley 2090-UXNPBMP-8S30 power cable is a standard, non-flex cable that is designed for the MP Series servo motors. The 2090-UXNPBMP-8S30 cable's jacket made with excellent chemical and mechanical properties to meet industrial requirements. Its locking mechanism prevents the connectors from becoming disconnected during vibration. These standard non-flexible cables simplify the terminations at the drive side by using large conductors. The 2090-UXNPBMP-8S30 power cable has flying leads at the drive end and a bayonet connector at the motor end. A breakout component or connector kit is needed for the drive end termination. This factory manufactured Series A cable is 30 meters in length and 8 AWG of wire size.

The 2090-UXNPBMP-8S30 power cable has precise connectors for motors and drives. The high quality of the cable insulation provides a long service life and protection during harsh environments. The conductors inside the cable are large enough to withstand the current drawn by the motor during normal operation. The thickness of the insulation prevents voltage peaks from causing the cable to fail. The applicable drives for this cable are the 2098-IPD-150, 220, HV150, and HV220 drives, but it is always necessary to avoid devices that cause impermissible movements and large amounts of force on the cable during operation. Connect the U, V, W, and GND ports of the drive and the motor to brown, black, blue, and green/yellow wires of the cable, respectively. Two different excess cables must not be coiled together and the power cable should be trimmed according to the application. This cable is manufactured for industrial motion control applications such as food packaging and conveyor systems applications.