500-CAD930

The 500-CAD930 contactor is a 500 series contactor which is an electrically-controlled switch which can be used for switching on or switching off an electrical power circuit. It is manufactured by Allen-Bradley and belongs to the 500 Contactors product line. These contactors can be used for motor control when overload protection is not provided separately and for the control of non-motor loads such as resistance heating and lighting. Contactors belonging to the Bulletin 500 series are available in NEMA 0 to NEMA 9 sizes. Note that the NEMA 5 to NEMA 9 sizes are only available as factory-assembled units. The NEMA 0 to NEMA 4 sizes can be ordered as modular kits or as complete components. The Bulletin 500 contactors support both 1-phase and 3-phase applications and they are top-wired for wiring convenience. The 500-CAD930 contactor is certified by the CSA, UL, and CE standards and they comply with the UL 508, NEMA, and ABS standards.

The Allen-Bradley 500-CAD930 contactor is available in NEMA Size 2 which means that it measures approximately 193 x 90.5 x 113 millimeters. The voltage rating of the 500-CAD930 contactor is 110 Volts at 50 Hertz and 120 Volts at 60 Hertz. The 500-CAD930 contactor has 3 power poles and 1 normally-open auxiliary contact. The continuous current rating of the contactor is 45 Amps. The maximum Horsepower rating at 115 Volts (single-phase) is 7.5 Horsepower. To prevent electrical shock, the 500-CAD930 contactor should be disconnected from the main AC power supply before it is installed or serviced. The contactor should be installed inside a suitable enclosure where it will be protected from contaminants. The contactor should always be kept dry and clean for reliable operation.