500-DAD930 | Allen Bradley Motors 500 Contactors

500-DAD930

500-DAD930

Description:

The Allen-Bradley 500-DAD930 Contactor is a NEMA AC contactor manufactured as part of the Bulletin 500 series. it features a NEMA size of 3 and a nominal coil voltage of 110 Volts and 120 Volts at 50 and 60 Hertz frequency ratings, respectively.

Rated 4.9 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 500-DAD930

Add more parts to quote

Description:

The Allen-Bradley 500-DAD930 Contactor is a NEMA AC contactor manufactured as part of the Bulletin 500 series. it features a NEMA size of 3 and a nominal coil voltage of 110 Volts and 120 Volts at 50 and 60 Hertz frequency ratings, respectively.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 500-DAD930.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 19 reviews

    Technical Specifications for 500-DAD930

BrandAllen-Bradley / Rockwell Automation
Series500 Contactors
Part Number500-DAD930
Product TypeNEMA AC/DC Contactor
Bulletin500
NEMA size3
NEMA EnclosureA
Minimum Nominal Coil Voltage110 V
Maximum Nominal Coil Voltage120 V
Frequency50/60 Hz
Power Poles3
Auxiliary Contact1 NO
BrandAllen-Bradley / Rockwell Automation
Series500 Contactors
Part Number500-DAD930
Product TypeNEMA AC/DC Contactor
Bulletin500
NEMA size3
NEMA EnclosureA
Minimum Nominal Coil Voltage110 V
Maximum Nominal Coil Voltage120 V
Frequency50/60 Hz
Power Poles3
Auxiliary Contact1 NO
s

About 500-DAD930

The 500-DAD930 Contactor is a NEMA AC contactor manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 500 line. Some of the main specifications and features of this contactor include a NEMA size of 3 and a nominal voltage coil voltage of 110 Volts at 50 Hertz and 120 Volts at 60 Hertz. This contactor comes with 3 power poles along with a single NO auxiliary contact. The Allen-Bradley 500-DAD930 NEMA AC Contactor is certified for compliance with the NEMA/EEMAC ICS 2, CSA C22.2 No.14, UL 508, ABS 4/5.115 (American Bureau of Shipping), IEEE 45, UCSG 46 CFR 111.70, EN/IEC 60947-4-1, and CE Mark standards. It is also CSA certified, and UL listed as certified for the Guide No. NLDX standards. 



 



The Allen-Bradley 500-DAD930 NEMA AC Contactor from the Allen-Bradley 500 Contactors series is manufactured as a complete modular kit which features a top-wiring setup, base contactor, and load-side terminal shield. It also has selectable coil voltage and a selectable number of poles as well as other options. The Allen-Bradley 500-DAD930 NEMA AC Contactor has all its power connections on the top to enhance wiring and connection convenience. Additionally, it allows for field wiring to enable it to be used in single-phase or 3-phase applications. It is available in NEMA sizes 0 to 4, and it can be ordered as individual components or as a complete module, depending on the application. This top-wired AC contactor comes with 120 Volts AC of rated coil voltage and it also has 1 N.O. auxiliary contact.



Repair Services for 500-DAD930

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 500-DAD930. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 500-DAD930

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 500-DAD930

Resolutions For 500-DAD930

About

Technical Specifications for 500-DAD930

BrandAllen-Bradley / Rockwell Automation
Series500 Contactors
Part Number500-DAD930
Product TypeNEMA AC/DC Contactor
Bulletin500
NEMA size3
NEMA EnclosureA
Minimum Nominal Coil Voltage110 V
Maximum Nominal Coil Voltage120 V
Frequency50/60 Hz
Power Poles3
Auxiliary Contact1 NO
BrandAllen-Bradley / Rockwell Automation
Series500 Contactors
Part Number500-DAD930
Product TypeNEMA AC/DC Contactor
Bulletin500
NEMA size3
NEMA EnclosureA
Minimum Nominal Coil Voltage110 V
Maximum Nominal Coil Voltage120 V
Frequency50/60 Hz
Power Poles3
Auxiliary Contact1 NO

About 500-DAD930

The 500-DAD930 Contactor is a NEMA AC contactor manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin 500 line. Some of the main specifications and features of this contactor include a NEMA size of 3 and a nominal voltage coil voltage of 110 Volts at 50 Hertz and 120 Volts at 60 Hertz. This contactor comes with 3 power poles along with a single NO auxiliary contact. The Allen-Bradley 500-DAD930 NEMA AC Contactor is certified for compliance with the NEMA/EEMAC ICS 2, CSA C22.2 No.14, UL 508, ABS 4/5.115 (American Bureau of Shipping), IEEE 45, UCSG 46 CFR 111.70, EN/IEC 60947-4-1, and CE Mark standards. It is also CSA certified, and UL listed as certified for the Guide No. NLDX standards. 



 



The Allen-Bradley 500-DAD930 NEMA AC Contactor from the Allen-Bradley 500 Contactors series is manufactured as a complete modular kit which features a top-wiring setup, base contactor, and load-side terminal shield. It also has selectable coil voltage and a selectable number of poles as well as other options. The Allen-Bradley 500-DAD930 NEMA AC Contactor has all its power connections on the top to enhance wiring and connection convenience. Additionally, it allows for field wiring to enable it to be used in single-phase or 3-phase applications. It is available in NEMA sizes 0 to 4, and it can be ordered as individual components or as a complete module, depending on the application. This top-wired AC contactor comes with 120 Volts AC of rated coil voltage and it also has 1 N.O. auxiliary contact.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 500-DAD930. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 500-DAD930. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF