Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 592 Overload Relays 592-EC3BC

Product image is representative; revision or series may vary. Contact us to request a specific version.

592-EC3BC

|
Need a Specific Revision?

The Allen-Bradley 592-EC3BC module is an overload relay module. It is part of the Bulletin 592 product line. The current rating of the 592-EC3BC module is 3 to 15 Amps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 592-EC3BC

ManufacturerAllen Bradley
Product TypeOverload Relay
Product Line592 Overload Relays
Part Number592-EC3BC
Weight1.00 lbs (0.45 kg)
Relay TypeSemiconductor
Current Range3 to 15 Amps
Contactor Size0 to 2
Poles3
Three-Phase OperationYes
Single-Phase OperationYes
Short Circuit Rating1000 Amps
Insulation Voltage300 Volts AC
Maximum Altitude2000 meters
Request a Repair

The Allen-Bradley 592-EC3BC module is a Bulletin 592 overload relay. The 592-EC3BC module is a type EC3 relay with 3 to 15 Amps of current rating and a contactor size of 0 to 2. It is intended for use in a heavy-duty industrial environment. The 592-EC3BC module is CE marked for conformity to the CE low voltage directive and the EMC directive. However, it should be noted that the CE conformity of the 592-EC3BC module does not imply that the entire installation will also conform. It is the responsibility of the installer to ensure the conformity of the entire installation. The 592-EC3BC module has also been tested to meet EMC directive 89, 336, EC. The motor and load ratings for the 592-EC3BC module include 690 Volts AC rated insulation voltage, 690 Volts AC rated operating voltage, 6 kilovolts rated impulse voltage, and 2 to 250 Hertz rated frequency.

The Allen-Bradley 592-EC3BC module is a 3-pole device and can be used for both single-phase and 3-phase operation. The relay is rated for 1 million operations. The short circuit current rating is 1000 Amps. The minimum operating current for the 592-EC3BC module is 10 milliamps at 5 Volts DC, 3 Amps at 120 Volts AC, and 1.5 Amps at 240 Volts AC. The thermal current rating for the relay is 5 Amps. The insulation voltage rating is 300 Volts AC and the rated operating voltage is 240 Volts AC. The housing of the relay module has an IP 20 rating. The maximum recommended altitude for the installation and operation of the 592-EC3BC module is 2000 meters. The 592-EC3BC module is a convection cooled device.