592-EC5CC

The 592-EC5CC is an Allen-Bradley manufactured microprocessor-based overload relay. This protective component is part of the E3 Plus category that comes with built-in voltage monitoring capability. Aside from voltage monitoring, this module is capable of detecting Overcurrent (Jam) Detection which is used to switch the motor offline quickly upon detection of such event preventing excessive current buildup; Stall detection that can be linked to the motor not reaching the full speed operation at a given start-up time; Underload or undercurrent detection which is a rapid drop in the output signal of the motor that usually takes place during pump cavitation, tool breakage, and belt breakage; Current imbalance or asymmetry which comes with adjustable warning settings of 10-100%. The 592-EC5CC comes with an adjustable current trip of 5-25 Amperes. It has a nominal operating voltage that complies with NEMA and IEC standards, specifically, 600V and 690V / 1000V, respectively. This electrical device has an adjustable trip class of 5-30 and is provided with both manual and automatic trip reset. It is also installed with a total of Six (6) 24 VDC discrete inputs that support sink wiring configuration while the Two (2) discrete outputs are form A or Normally Open (N.O.) Single Pole Double Throw (SPDT) contacts with rated operating current of 5 Amperes and rated operating voltage of 250 VAC. These embedded I/Os can be utilized by the user for hardwiring of external indicating devices and implementing electrical interlocks to related systems. The 592-EC5CC supports operation in single-phase and three-phase power systems. Selection is configured via the overload relay’s parameter.

belongs to the 592 Overload Relays series and the E3 Plus product line. This overload relay has a maximum overload relay current of 25 Amps and it comes with voltage protection as well as energy monitoring functionalities. The full-load current range of the 592-EC5CC Solid-State Overload Relay is 5 to 25 Amps. Other specifications of this relay include a rated insulation voltage of 690 Volts AC, and a rated impulse strength of 6 kilovolts AC. The E3 and E3 Plus overload relays like the 592-EC5CC Solid-State Overload Relay have a rated operating voltage of 600/690 Volts AC, and a rated frequency of 20 to 250 Hertz. Other notable features and specifications of the Allen-Bradley 592-EC5CC Solid-State Overload Relay include terminal cross-sections that are available in different terminal types like the M5 and M8 types and they come with screws. The 592-EC5CC Solid-State Overload Relay also features parameter monitoring and editing functions, which means that the selected device supports the full parameter object, and the parameters are accessible as a numbered list of parameters or as groups. There is a parameter screen that is also designed to display all the information for a single parameter. The parameter values can also be monitored, copied, or edited from the screen parameter. The 592-EC5CC Solid-State Overload Relay comes with LED status indicators.