The 800H-FRXMQ10RA7 push button is an illuminated push button that has been included in the 800H Push Buttons series that is made by Allen-Bradley/Rockwell Automation. This push button is corrosion-resistant, watertight, and oil-tight, which makes it suitable to operate within different applications. This specific push button model is a push-pull type of push button that is red. It has 3 momentary operator positions The Allen-Bradley/Rockwell Automation 800H-FRXMQ10RA7 illuminated push button comes with an incandescent light. It is a full voltage button and operates with a voltage rating of 120 Volts AC/DC. The head of the push button is a mushroom head. The size of this 800H-FRXMQ10RA7 push button is 35 millimeters and it can be used as an emergency stop push button.

The Allen-Bradley/Rockwell Automation 800H-FRXMQ10RA7 illuminated push button can be operated in 3 positions and it comes with 2 contact blocks. These contact blocks are 1 normally closed contact and 1 normally open contact. This button does not contain an internal shunt resistor. One needs to be ordered from the accessories catalog. The Allen-Bradley/Rockwell Automation 800H-FRXMQ10RA7 illuminated push button has an electrical design life cycle of 1,000,000 operations when operating at its maximum load. It can resist vibrations and shocks. This button has a typical operating force of 8 pounds approximately when it is positioned in or pulled from the center position. It can cause an action when pressed, and it can be used as an interrupting button or emergency stop button, depending on the application requirements. It is recommended to install this button in an environment with a temperature of -40 to 55 degrees Celsius.