The 802PR-LAAA3 sensor from Allen-Bradley is an industrial proximity sensor. This proximity sensor is a member of the 802PR Proximity Sensors series. The 802PR-LAAA3 proximity sensor is a 2-wire type of proximity sensor that runs on AC power. It is suitable for use in hazardous industrial locations. The specific type of hazardous industrial locations that the 802PR-LAAA3 proximity sensor is made for are Division 1 and 2, Class I, II, and III, and Groups A, B, C, D, E, F, and G rated locations as long as it is used with an approved intrinsically safe zener barrier. The 802PR-LAAA3 proximity sensor supports side sensing and it has a 14-millimeter sensing distance. This sensor comes with an indicator light that lets the users know if the load that the proximity sensor is handling has been energized. This proximity sensor is a shielded proximity sensor and its outputs are configured to be normally open.

The Allen-Bradley 802PR-LAAA3 proximity sensor from the 802PR Proximity Sensors series supports a switching frequency of 16 Hertz. This sensor uses AC voltage and its operating voltage range is from 102 to 132 Volts AC. Although it can be used in hazardous locations, the 802PR-LAAA3 proximity sensor is not corrosion-resistant and it should never be exposed to corrosive chemicals or atmospheres. The housing of this proximity sensor is made of self-extinguishing glass-reinforced polyester. The ambient operating temperature range of the 802PR-LAAA3 proximity sensor is from -25 to 75 degrees Celsius or -13 to 167 degrees Fahrenheit. The shock rating for this proximity sensor is 30 g for 11 milliseconds.