802T-WST

The Allen-Bradley 802T-WST switch is a Bulletin 802T limit switch. The 802T-WST limit switch has an oil tight construction and its enclosure is a NEMA Type 13 enclosure with an IP 54 protection rating. The actuation type supported by the 802T-WST limit switch is the wobble stick type and it is made of nylon. The category to which the switch belongs is the non-plug-in category. The DC contact ratings for the 802T-WST limit switch are as follows: 0.4 Amps at 115 to 125 Volts DC, 0.2 Amps at 230 to 250 Volts DC, and 0.1 Amps at 550 to 660 Volts DC. The AC contact ratings for the 802T-WST limit switch at 50 to 60 Hertz are as follows: 60 Amps make/6 Amps break at 120 Volts AC, 30 Amps make/3 Amps break at 240 Volts AC, 15 Amps make/1.5 Amps break at 480 Volts AC, and 12 Amps make/1.2 Amps break at 600 Volts AC.

The energy rating of the 802T-WST limit switch is standard. The 802T-WST limit switch is a complete switch with 4 circuits. A safety switch is not available on the limit switch. The maximum recommended torque for contact operation on the 802T-WST limit switch is 0.79 N-m. The specifications for the maximum travel to contact, maximum travel to reset and maximum travel are 12 degrees, 9 degrees, and 12 degrees respectively. Two mounting options are available for the 802T-WST limit switch which are the manifold mount and cavity mount. A transparent cover can also be ordered if required. The connection options for the 802T-WST limit switch include the 9-conductor connector with an 8-foot cable, the 9-conductor connector with a 6-foot cable, an STO cable (5 feet), and a 9-inch mini-type receptacle. An operating lever is needed to operate the 802T-WST limit switch.