DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 836-C60A device is an 836 Pressure Controls series unit by Allen-Bradley. It can operate in hydraulic and pneumatic systems.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 836-C60A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836-C60A |
Description | Pressure Controller |
Bellows | External |
Contact Rating | 240/600 Volts, 5/3 Amps |
Operating Range | 30 inches Hg Vacuum, 10 PSI |
Line Pressure | 65 PSI |
Enclosure | NEMA 1 |
Occasional Surge | 65 PSI |
Standards | IEC, CSA |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836-C60A |
Description | Pressure Controller |
Bellows | External |
Contact Rating | 240/600 Volts, 5/3 Amps |
Operating Range | 30 inches Hg Vacuum, 10 PSI |
Line Pressure | 65 PSI |
Enclosure | NEMA 1 |
Occasional Surge | 65 PSI |
Standards | IEC, CSA |
The 836-C60A pressure controller is an Allen-Bradley electromechanical pressure controller. It comes with external bellows and can handle pressure in both liquid and gas media. It has a contact rating of 240 Volts with 5 Amps, and 600 Volts with 3 Amps. This pressure control unit is designed to control and monitor the pressure in different applications and different hydraulic/pneumatic conditions. It can help improve the application process and system, and protect the equipment for a long operating life. The 836-C60A pressure controller has an operating range of 30 inches Hg in a vacuum with 10 PSI. It can handle a line pressure of 65 PSI maximum and it can accommodate an occasional surge up to 65 PSI maximum. The assembly is housed inside a NEMA Type 1 enclosure and it can be used for indoor and outdoor location. The temperature of the environment should be in the -30 to 66 degrees Celsius range.
The Allen-Bradley 836-C60A 836 series pressure controller comes with a standard contact block. It has a single pole, double throw snap action. The trip setting in the unit is the difference between the 2 bellows at which the contacts transfer from their normal state to a changed state. The 836-C60A pressure controller is designed to operate with both open and closed electrical circuits. The incoming pressure is applied to the actuator which in turn exerts force on the main spring. The front side of the assembly has the self-lifting pressure plate terminal. A finger-safe contact block shield with the IEC and CSA ratings is also present. The pressure controller can be easily mounted by using a mounting bracket that is on the bottom of the unit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 836-C60A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836-C60A |
Description | Pressure Controller |
Bellows | External |
Contact Rating | 240/600 Volts, 5/3 Amps |
Operating Range | 30 inches Hg Vacuum, 10 PSI |
Line Pressure | 65 PSI |
Enclosure | NEMA 1 |
Occasional Surge | 65 PSI |
Standards | IEC, CSA |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836-C60A |
Description | Pressure Controller |
Bellows | External |
Contact Rating | 240/600 Volts, 5/3 Amps |
Operating Range | 30 inches Hg Vacuum, 10 PSI |
Line Pressure | 65 PSI |
Enclosure | NEMA 1 |
Occasional Surge | 65 PSI |
Standards | IEC, CSA |
The 836-C60A pressure controller is an Allen-Bradley electromechanical pressure controller. It comes with external bellows and can handle pressure in both liquid and gas media. It has a contact rating of 240 Volts with 5 Amps, and 600 Volts with 3 Amps. This pressure control unit is designed to control and monitor the pressure in different applications and different hydraulic/pneumatic conditions. It can help improve the application process and system, and protect the equipment for a long operating life. The 836-C60A pressure controller has an operating range of 30 inches Hg in a vacuum with 10 PSI. It can handle a line pressure of 65 PSI maximum and it can accommodate an occasional surge up to 65 PSI maximum. The assembly is housed inside a NEMA Type 1 enclosure and it can be used for indoor and outdoor location. The temperature of the environment should be in the -30 to 66 degrees Celsius range.
The Allen-Bradley 836-C60A 836 series pressure controller comes with a standard contact block. It has a single pole, double throw snap action. The trip setting in the unit is the difference between the 2 bellows at which the contacts transfer from their normal state to a changed state. The 836-C60A pressure controller is designed to operate with both open and closed electrical circuits. The incoming pressure is applied to the actuator which in turn exerts force on the main spring. The front side of the assembly has the self-lifting pressure plate terminal. A finger-safe contact block shield with the IEC and CSA ratings is also present. The pressure controller can be easily mounted by using a mounting bracket that is on the bottom of the unit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 836-C60A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 836-C60A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.