836E-DA1EU1-D4 | Allen Bradley Motors 836 Pressure Controls

836E-DA1EU1-D4

836E-DA1EU1-D4

Description:

The Allen-Bradley 836E-DA1EU1-D4 solid-state pressure switch sensor is manufactured as a member of the Bulletin 836E product line. It is also a member of the 836 Pressure Controls series. This device features an IP 66 enclosure type and it has a maximum pressure rating of 400 PSI.

Rated 4.6 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836E-DA1EU1-D4

Add more parts to quote

Description:

The Allen-Bradley 836E-DA1EU1-D4 solid-state pressure switch sensor is manufactured as a member of the Bulletin 836E product line. It is also a member of the 836 Pressure Controls series. This device features an IP 66 enclosure type and it has a maximum pressure rating of 400 PSI.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836E-DA1EU1-D4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 20 reviews

    Technical Specifications for 836E-DA1EU1-D4

ManufacturerAllen-Bradley/Rockwell Automation
Series836 Pressure Controls
Part Number836E-DA1EU1-D4
Product TypeSolid-State Pressure Sensor Switch
Dimensions38.5 x 141 mm
Enclosure TypeIP 66
Enclosure MaterialStainless Steel
Pressure Rating0 to 400 PSI
Operating Cycles>10 Million
Operating Temperature Rating-40 to 185 Degrees Fahrenheit
ManufacturerAllen-Bradley/Rockwell Automation
Series836 Pressure Controls
Part Number836E-DA1EU1-D4
Product TypeSolid-State Pressure Sensor Switch
Dimensions38.5 x 141 mm
Enclosure TypeIP 66
Enclosure MaterialStainless Steel
Pressure Rating0 to 400 PSI
Operating Cycles>10 Million
Operating Temperature Rating-40 to 185 Degrees Fahrenheit
s

About 836E-DA1EU1-D4

The Allen-Bradley 836E-DA1EU1-D4 controller is a solid-state pressure sensor switch that is manufactured as part of the Bulletin 836E product line in the 836 Pressure Controls series. The 836E-DA1EU1-D4 solid-state pressure sensor switch is intended for the measuring and monitoring of the gauge and absolute pressures in the host system. It is built with modern technology and it meets the requirements and directives of the EC standards. Note that the sensor switch can be a source of danger when it is incorrectly used or installed. The Bulletin 836E pressure switches like the 836E-DA1EU1-D4 sensor switch are designed to meet the requirements of the IEC 61508 as well as the IEC 61511-1 (FDIS) standards. The 836E-DA1EU1-D4 sensor switch is not approved for use in intrinsic safety applications or hazardous areas.



 



The output settings of Allen Bradley 836E-DA1EU1-D4 sensor switch include the hysteresis mode, which enables 2-point control and depending on the pressure setting, it allows hysteresis to be set through the set point (SP) as well as the reset point (RSP). The switch also features the window mode that enables the monitoring of the application process pressure range. In addition, there is the analog output mode, which helps to return the 4 to 20 milliamps rated signal that is proportional to the measured value. The operators can set the upper and lower range values in the 836E-DA1EU1-D4 sensor switch. The Bulletin 836E product line features a process connection module, which is an adapter module and sensor module with an adapter thread which makes it possible to change the process connection at a later stage. This switch can operate with up to 400 PSI of pressure.



Repair Services for 836E-DA1EU1-D4

Type Lead Time Price Action
Repair Service 2-4 weeks $520cartAdd to Cart

Our highly skilled technicians can repair your 836E-DA1EU1-D4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836E-DA1EU1-D4

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836E-DA1EU1-D4

Resolutions For 836E-DA1EU1-D4

About

Technical Specifications for 836E-DA1EU1-D4

ManufacturerAllen-Bradley/Rockwell Automation
Series836 Pressure Controls
Part Number836E-DA1EU1-D4
Product TypeSolid-State Pressure Sensor Switch
Dimensions38.5 x 141 mm
Enclosure TypeIP 66
Enclosure MaterialStainless Steel
Pressure Rating0 to 400 PSI
Operating Cycles>10 Million
Operating Temperature Rating-40 to 185 Degrees Fahrenheit
ManufacturerAllen-Bradley/Rockwell Automation
Series836 Pressure Controls
Part Number836E-DA1EU1-D4
Product TypeSolid-State Pressure Sensor Switch
Dimensions38.5 x 141 mm
Enclosure TypeIP 66
Enclosure MaterialStainless Steel
Pressure Rating0 to 400 PSI
Operating Cycles>10 Million
Operating Temperature Rating-40 to 185 Degrees Fahrenheit

About 836E-DA1EU1-D4

The Allen-Bradley 836E-DA1EU1-D4 controller is a solid-state pressure sensor switch that is manufactured as part of the Bulletin 836E product line in the 836 Pressure Controls series. The 836E-DA1EU1-D4 solid-state pressure sensor switch is intended for the measuring and monitoring of the gauge and absolute pressures in the host system. It is built with modern technology and it meets the requirements and directives of the EC standards. Note that the sensor switch can be a source of danger when it is incorrectly used or installed. The Bulletin 836E pressure switches like the 836E-DA1EU1-D4 sensor switch are designed to meet the requirements of the IEC 61508 as well as the IEC 61511-1 (FDIS) standards. The 836E-DA1EU1-D4 sensor switch is not approved for use in intrinsic safety applications or hazardous areas.



 



The output settings of Allen Bradley 836E-DA1EU1-D4 sensor switch include the hysteresis mode, which enables 2-point control and depending on the pressure setting, it allows hysteresis to be set through the set point (SP) as well as the reset point (RSP). The switch also features the window mode that enables the monitoring of the application process pressure range. In addition, there is the analog output mode, which helps to return the 4 to 20 milliamps rated signal that is proportional to the measured value. The operators can set the upper and lower range values in the 836E-DA1EU1-D4 sensor switch. The Bulletin 836E product line features a process connection module, which is an adapter module and sensor module with an adapter thread which makes it possible to change the process connection at a later stage. This switch can operate with up to 400 PSI of pressure.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $520cartAdd to Cart

Our highly skilled technicians can repair your 836E-DA1EU1-D4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $520cartAdd to Cart

Our highly skilled technicians can repair your 836E-DA1EU1-D4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF