Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 836 Pressure Controls 836E-DC1EN3-D4

Product image is representative; revision or series may vary. Contact us to request a specific version.

836E-DC1EN3-D4

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 836E-DC1EN3-D4 pressure sensor is made for measuring and monitoring applications in an industrial setting. The 836E-DC1EN3-D4 pressure sensor with a display is part of the 836 series and it has a pressure range of 0 to 10 bar. The maximum working pressure rating of the unit is 26.7 bar and the current consumption rating is up to 60 milliamps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 836E-DC1EN3-D4

ManufacturerAllen Bradley
Product Type836E Display Pressure Sensor
Product Line836 Pressure Controls
Part Number836E-DC1EN3-D4
Weight1.13 lbs (0.51 kg)
Output TypeDual PNP Output or Single PNP Output
Analog Output Current Rating4 to 20 milliamps
Pressure Range0 to 10 bar
Maximum Working Pressure26.7 bar
Process ConnectionG1/4 BSPP (female)
Current Consumption60 milliamps
Voltage Rating12 to 30 Volts DC
Protection RatingNEMA 4X/6P (IP 66)
CertificationsCE, cULus
Request a Repair

The catalog number 836E-DC1EN3-D4 is for a solid-state pressure sensor switch with a display that has been designed and manufactured by Allen-Bradley/Rockwell Automation. The unit is part of Bulletin 836E in the 836 Pressure Controls series and it serves as a pressure switch for various applications. Some of these applications include measuring pressure, monitoring both absolute and gauge pressure levels, and many more. The 836E-DC1EN3-D4 pressure sensor switch is built according to the EC directives and it has certifications like the CE and cULus certifications. Additionally, it should be mentioned that the 836E-DC1EN3-D4 pressure sensor switch meets the requirements of the IEC 61508 and IEC 61511-1 (FDIS) standards.

The 836E-DC1EN3-D4 pressure sensor switch has an enclosure rating of NEMA 4X/6P (IP 66) and it has a maximum working pressure of 26.7 bar. The maximum working pressure of the sensor is determined at a reference temperature of 20 degrees Celsius (68 degrees Fahrenheit). The 836E-DC1EN3-D4 pressure sensor switch uses a G1/4 BSPP female process connector and it operates within a 0 to 10 bar pressure range. The unit can have a dual PNP output or single PNP output. The analog output current rating is 4 to 20 milliamps. The 836E-DC1EN3-D4 pressure sensor switch has an integrated display and it features an operating temperature range of -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit). The measuring cell of the switch is a piezoresistive cell and it uses a metallic measuring diaphragm. The installation process of the switch is simple and the switch is designed to be mounted with a shut-off assembly placed above the sampling nozzle.