836E-DC1EQ1-D4 | Allen Bradley Motors 836 Pressure Controls

836E-DC1EQ1-D4

836E-DC1EQ1-D4

Description:

The 836E-DC1EQ1-D4 pressure sensor switch by Allen-Bradley/Rockwell Automation is an industrial component made for DC applications. The voltage rating of the unit is 12 to 30 Volts DC and its typical current consumption is 60 milliamps. The unit is part of the 836 Pressure Controls series and it has a pressure range of 0 to 600 bar, along with a maximum working pressure of 1600.5 bar.

Rated 4.6 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836E-DC1EQ1-D4

Add more parts to quote

Description:

The 836E-DC1EQ1-D4 pressure sensor switch by Allen-Bradley/Rockwell Automation is an industrial component made for DC applications. The voltage rating of the unit is 12 to 30 Volts DC and its typical current consumption is 60 milliamps. The unit is part of the 836 Pressure Controls series and it has a pressure range of 0 to 600 bar, along with a maximum working pressure of 1600.5 bar.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836E-DC1EQ1-D4.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 13 reviews

    Technical Specifications for 836E-DC1EQ1-D4

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836E-DC1EQ1-D4
Product Type836E Display Pressure Sensor
Output TypeDual PNP Output or Single PNP Output
Analog Output Current Rating4 to 20 milliamps
Pressure Range0 to 600 bar
Maximum Working Pressure1600.5 bar
Process ConnectorQuarter-Inch NPT (Female)
Current Consumption60 milliamps
Voltage Rating12 to 30 Volts DC
Protection RatingNEMA 4X/6P (IP 66)
CertificationsCE, cULus
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836E-DC1EQ1-D4
Product Type836E Display Pressure Sensor
Output TypeDual PNP Output or Single PNP Output
Analog Output Current Rating4 to 20 milliamps
Pressure Range0 to 600 bar
Maximum Working Pressure1600.5 bar
Process ConnectorQuarter-Inch NPT (Female)
Current Consumption60 milliamps
Voltage Rating12 to 30 Volts DC
Protection RatingNEMA 4X/6P (IP 66)
CertificationsCE, cULus
s

About 836E-DC1EQ1-D4

The product code 836E-DC1EQ1-D4 is an order reference for a pressure sensor switch from the Allen-Bradley 836 Pressure Controls series. The unit has been designed and produced by Allen-Bradley/Rockwell Automation and it comes with a display for better user experience and easier operation. The display allows the users to monitor the system’s pressure levels easily. The unit has a maximum working pressure of 1600.5 bar and a pressure range of 0 to 600 bar. The 836E-DC1EQ1-D4 pressure sensor switch operates on DC voltage and it can have 2 PNP outputs or a single PNP output with an analog output with a current rating of 4 to 20 milliamps. It includes a micro connector of the M12 type and it is certified by the CE and cULus standards. The 836E-DC1EQ1-D4 pressure sensor switch has a quarter-inch NPT (female) process connector and it features a voltage rating of 12 to 30 Volts DC. 



 



The Allen-Bradley 836E-DC1EQ1-D4 pressure sensor switch can be used with 2-meter mating cables with 4-pin micro connectors or right-angle connectors. These cables include an epoxy-coated zinc coupling nut. The 836E-DC1EQ1-D4 pressure sensor switch is designed for on-site programming via push buttons. The unit has 3 push buttons along with LED indicators and its digital display. The unit includes a status LED indicator and 2 additional LED indicators for showing different pressure switching states. On the front of the 836E-DC1EQ1-D4 pressure sensor switch there is a communications jack for connection to a PC. The programming menu of the 836E-DC1EQ1-D4 pressure sensor switch is straightforward and it does not require any previous knowledge or experience for operation. The users can navigate easily between different function groups and choose the best solution for their applications.



Repair Services for 836E-DC1EQ1-D4

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836E-DC1EQ1-D4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836E-DC1EQ1-D4

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836E-DC1EQ1-D4

Resolutions For 836E-DC1EQ1-D4

About

Technical Specifications for 836E-DC1EQ1-D4

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836E-DC1EQ1-D4
Product Type836E Display Pressure Sensor
Output TypeDual PNP Output or Single PNP Output
Analog Output Current Rating4 to 20 milliamps
Pressure Range0 to 600 bar
Maximum Working Pressure1600.5 bar
Process ConnectorQuarter-Inch NPT (Female)
Current Consumption60 milliamps
Voltage Rating12 to 30 Volts DC
Protection RatingNEMA 4X/6P (IP 66)
CertificationsCE, cULus
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836E-DC1EQ1-D4
Product Type836E Display Pressure Sensor
Output TypeDual PNP Output or Single PNP Output
Analog Output Current Rating4 to 20 milliamps
Pressure Range0 to 600 bar
Maximum Working Pressure1600.5 bar
Process ConnectorQuarter-Inch NPT (Female)
Current Consumption60 milliamps
Voltage Rating12 to 30 Volts DC
Protection RatingNEMA 4X/6P (IP 66)
CertificationsCE, cULus

About 836E-DC1EQ1-D4

The product code 836E-DC1EQ1-D4 is an order reference for a pressure sensor switch from the Allen-Bradley 836 Pressure Controls series. The unit has been designed and produced by Allen-Bradley/Rockwell Automation and it comes with a display for better user experience and easier operation. The display allows the users to monitor the system’s pressure levels easily. The unit has a maximum working pressure of 1600.5 bar and a pressure range of 0 to 600 bar. The 836E-DC1EQ1-D4 pressure sensor switch operates on DC voltage and it can have 2 PNP outputs or a single PNP output with an analog output with a current rating of 4 to 20 milliamps. It includes a micro connector of the M12 type and it is certified by the CE and cULus standards. The 836E-DC1EQ1-D4 pressure sensor switch has a quarter-inch NPT (female) process connector and it features a voltage rating of 12 to 30 Volts DC. 



 



The Allen-Bradley 836E-DC1EQ1-D4 pressure sensor switch can be used with 2-meter mating cables with 4-pin micro connectors or right-angle connectors. These cables include an epoxy-coated zinc coupling nut. The 836E-DC1EQ1-D4 pressure sensor switch is designed for on-site programming via push buttons. The unit has 3 push buttons along with LED indicators and its digital display. The unit includes a status LED indicator and 2 additional LED indicators for showing different pressure switching states. On the front of the 836E-DC1EQ1-D4 pressure sensor switch there is a communications jack for connection to a PC. The programming menu of the 836E-DC1EQ1-D4 pressure sensor switch is straightforward and it does not require any previous knowledge or experience for operation. The users can navigate easily between different function groups and choose the best solution for their applications.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836E-DC1EQ1-D4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836E-DC1EQ1-D4. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF