Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 836 Pressure Controls 836E-DC1ER1-D4

Product image is representative; revision or series may vary. Contact us to request a specific version.

836E-DC1ER1-D4

|
Need a Specific Revision?

The 836E-DC1ER1-D4 pressure sensor switch comes with a display, operating keys and multiple LEDs to provide easy operation. The unit is manufactured by Allen-Bradley/Rockwell Automation and it is available through the 836 Pressure Controls series. The 836E-DC1ER1-D4 pressure sensor switch is intended for use on a DC voltage range of 12 to 30 Volts and it consumes a maximum current of 60 milliamps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 836E-DC1ER1-D4

ManufacturerAllen Bradley
Product Type836E Display Pressure Sensor
Product Line836 Pressure Controls
Part Number836E-DC1ER1-D4
Weight3.00 lbs (1.36 kg)
Output TypeDual PNP Output or Single PNP Output
Analog Output Current Rating4 to 20 milliamps
Pressure Range0 to 1500 bar
Maximum Working Pressure1600.5 bar
Process ConnectionQuarter-Inch NPT (Female)
Current Consumption60 milliamps
Voltage Rating12 to 30 Volts DC
Protection RatingNEMA 4X/6P (IP 66)
CertificationsCE, cULus
Request a Repair

The product code 836E-DC1ER1-D4 is used for a pressure sensor switch which has been designed and manufactured by Allen-Bradley/Rockwell Automation. This CE marked and cULus certified pressure sensor switch has a switching capacity of more than 10,000,000 switching cycles and a voltage drop PNP of less than or equal to 2 Volts. The 836E-DC1ER1-D4 pressure sensor switch includes an overload protection feature which initiates an automatic load check of the switching current. If the current is beyond its upper limits, the output of the 836E-DC1ER1-D4 pressure sensor switch is switched off and the unit tests the switching current every 0.4 seconds. The current consumption rating of the unit is less than 60 milliamps without a load and with reverse polarity protection.

The 836E-DC1ER1-D4 pressure sensor switch has a DC voltage rating of 12 to 30 Volts DC and a pressure range of 0 to 1500 bar. In addition to that, the maximum working pressure rating is 1600.5 bar and it provides an analog output current of 4 to 20 milliamps. The unit can have a dual PNP output or single PNP output. The 836E-DC1ER1-D4 pressure sensor switch has several useful protection features for if a power supply failure occurs. If there is an over-voltage situation, the unit will continue working at up to 34 Volts DC in a safe manner and without causing any damages. On the other hand, if the voltage falls below the specified levels, the unit will switch off in order to avoid any damages to the equipment. The typical operating temperature of the 836E-DC1ER1-D4 pressure sensor switch is -40 to 100 degrees Celsius or -40 to 212 degrees Fahrenheit.