836T-D463JX81X15 | Allen Bradley Motors 836 Pressure Controls

836T-D463JX81X15

836T-D463JX81X15

Description:

The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller is a heavy-duty 836 series controller used for applications that require the precise measurement and control of the differential pressure between 2 different incoming signals located at different points in an industrial system. A pair of electrical contacts are activated when the differential pressure between these points reaches a pre-configured value.

Rated 5 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836T-D463JX81X15

Add more parts to quote

Description:

The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller is a heavy-duty 836 series controller used for applications that require the precise measurement and control of the differential pressure between 2 different incoming signals located at different points in an industrial system. A pair of electrical contacts are activated when the differential pressure between these points reaches a pre-configured value.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836T-D463JX81X15.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 5 reviews

    Technical Specifications for 836T-D463JX81X15

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-D463JX81X15
Product DescriptionElectromechanical Differential Pressure Controller
Type of Electrical ContactsSPDT (Single-Pole, Double-Throw)
Number of Electrical Contacts2
Current Rating5 Amps
Voltage Rating600 Volts AC
Bellows TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5-95% (non-condensing)
MountingPanel or Standalone Mounting
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-D463JX81X15
Product DescriptionElectromechanical Differential Pressure Controller
Type of Electrical ContactsSPDT (Single-Pole, Double-Throw)
Number of Electrical Contacts2
Current Rating5 Amps
Voltage Rating600 Volts AC
Bellows TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5-95% (non-condensing)
MountingPanel or Standalone Mounting
s

About 836T-D463JX81X15

The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller is a member of the 836 series of pressure controllers that are specifically designed and manufactured by Allen Bradley for the precise measurement and control of differential pressure levels in an industrial application process. This controller can operate as a standalone controller and it uses 2 electrical contacts to engage or disengage a control circuit, such as in a system with a combination of pumps and automatic valves intended to keep the water level in a tank between 2 user-defined points. The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller can also be used in machine tool applications, which often require very precise measurement and control of the pressure difference between 2 pressure chambers, or precise control of the speed and direction of the movement of a hydraulic cylinder.



 



The built-in electrical contacts that com from the factory in the Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller are of the SPDT (Single-Pole, Double-Throw) type, which means that when one of the contact opens the other one closes and vice versa. With those contacts, up to 4 independent electrical circuits may be activated by the differential pressure tripping point that is externally adjustable by using a set of pressure ranges and set point adjustment screws and locking nuts. The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller’s electrical specifications for the circuits to be connected to the controller are a maximum voltage of 600 Volts AC, and a maximum inrush current rating of 5 Amps. Only properly trained technicians should be allowed to perform maintenance operations on the device.



Repair Services for 836T-D463JX81X15

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-D463JX81X15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836T-D463JX81X15

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836T-D463JX81X15

Resolutions For 836T-D463JX81X15

About

Technical Specifications for 836T-D463JX81X15

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-D463JX81X15
Product DescriptionElectromechanical Differential Pressure Controller
Type of Electrical ContactsSPDT (Single-Pole, Double-Throw)
Number of Electrical Contacts2
Current Rating5 Amps
Voltage Rating600 Volts AC
Bellows TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5-95% (non-condensing)
MountingPanel or Standalone Mounting
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-D463JX81X15
Product DescriptionElectromechanical Differential Pressure Controller
Type of Electrical ContactsSPDT (Single-Pole, Double-Throw)
Number of Electrical Contacts2
Current Rating5 Amps
Voltage Rating600 Volts AC
Bellows TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5-95% (non-condensing)
MountingPanel or Standalone Mounting

About 836T-D463JX81X15

The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller is a member of the 836 series of pressure controllers that are specifically designed and manufactured by Allen Bradley for the precise measurement and control of differential pressure levels in an industrial application process. This controller can operate as a standalone controller and it uses 2 electrical contacts to engage or disengage a control circuit, such as in a system with a combination of pumps and automatic valves intended to keep the water level in a tank between 2 user-defined points. The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller can also be used in machine tool applications, which often require very precise measurement and control of the pressure difference between 2 pressure chambers, or precise control of the speed and direction of the movement of a hydraulic cylinder.



 



The built-in electrical contacts that com from the factory in the Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller are of the SPDT (Single-Pole, Double-Throw) type, which means that when one of the contact opens the other one closes and vice versa. With those contacts, up to 4 independent electrical circuits may be activated by the differential pressure tripping point that is externally adjustable by using a set of pressure ranges and set point adjustment screws and locking nuts. The Allen-Bradley 836T-D463JX81X15 Electromechanical Differential Pressure Controller’s electrical specifications for the circuits to be connected to the controller are a maximum voltage of 600 Volts AC, and a maximum inrush current rating of 5 Amps. Only properly trained technicians should be allowed to perform maintenance operations on the device.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-D463JX81X15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-D463JX81X15. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF