The 836T-T252JX23X9 controller is a pressure control device that has been designed and launched by Allen-Bradley/Rockwell Automation. This device is used mainly to detect and control pressure. It comes with 2 contacts that provide a make or break action that translates into a circuit interrupting action. This interruption stops operations in the system to protect the whole system against damages or hazardous situations with pressure levels that are too high or too low. The Allen-Bradley/Rockwell Automation 836T-T252JX23X9 pressure control device comes with an enclosure. This Type 1, 4, & 13 enclosure protects the internal parts of the device against contact with different kinds of particles that can cause long-term damage to these parts. This enclosure protects the device against dust and dirt particles in the environment, but not against corrosive substances. This controller comes with internal copper alloy bellows.

The Allen-Bradley/Rockwell Automation 836T-T252JX23X9 pressure control device’s 2 contacts that trip at pressure levels that are too high or low for the system can operate on either AC or DC voltage. These contacts come with a particular configuration that consists of a single-pole, single-throw, normally closed configuration in which the contacts will open in response to rising pressure. There are no contact replacements available for this configuration. The Allen-Bradley/Rockwell Automation 836T-T252JX23X9 pressure control device operates with a maximum line pressure of 200 PSI and a maximum occasional line pressure of 220 PSI. This device can operate with water, air, and non-corrosive gases and liquids. It is important to avoid exposure to corrosive materials since these can cause damages to the controller, its components, or the host system.