DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The electromechanical 836T-T262E controller is a pressure control tool by Allen-Bradley in the 836 Pressure Controls series. It is housed inside a Type 7 & 9, 4 & 13 enclosure. It is rated at 600 Volts AC and 5 Amps.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 836T-T262E. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836T-T262E |
Description | Pressure Controller |
Enclosure | Type 7 & 9, 4 & 13 |
Voltage | 600 Volts AC |
Current | 5 Amps |
Operating Range | 250 PSI |
Temperature | -30 to 66 degrees Celsius |
Mounting | Bracket |
Bellows | External |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836T-T262E |
Description | Pressure Controller |
Enclosure | Type 7 & 9, 4 & 13 |
Voltage | 600 Volts AC |
Current | 5 Amps |
Operating Range | 250 PSI |
Temperature | -30 to 66 degrees Celsius |
Mounting | Bracket |
Bellows | External |
The 836T-T262E controller is an Allen-Bradley 836 series industrial pressure control unit. It is an electromechanical device with stainless steel bellows. This controller is packed inside a Type 7 & 9, 4 & 13 rated enclosure and it can be used for applications in hazardous locations. It comes with a standard trip setting and it has a voltage rating of 600 Volts AC and a current rating of 5 Amps. This industrial pressure control unit has an operating pressure rating of up to 250 PSI. The 836T-T262E controller comes with independently adjustable operating and differential pressure ranges. A 4-circuit contact block is present in this controller variant. The front side of the assembly has the operation status indicator. An external differential pressure adjustment screw helps to set the pressure range for the trip and reset ratings.
The operating temperature of the 836T-T262E controller should not exceed 66 degrees Celsius. The controller can be stored in a temperature range between -30 and 93 degrees Celsius. The exact operating temperature range is based on the absence of freezing moisture, water, and other fluids. This pressure control unit can be easily mounted without removing the front cover by using a bracket. The 836T-T262E controller can be arranged with single-pole double-throw operation or different circuits with the same polarity. The front of the controller has the nameplate and a removable paint mask that is used to match the machine or equipment color code requirements. The 836T-T262E controller can work with both open and closed electrical circuits. The trip occurs when pressure is applied to the actuators which in turn releases pressure on the main spring.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 836T-T262E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836T-T262E |
Description | Pressure Controller |
Enclosure | Type 7 & 9, 4 & 13 |
Voltage | 600 Volts AC |
Current | 5 Amps |
Operating Range | 250 PSI |
Temperature | -30 to 66 degrees Celsius |
Mounting | Bracket |
Bellows | External |
Brand | Allen-Bradley / Rockwell Automation |
Series | 836 Pressure Controls |
Part Number | 836T-T262E |
Description | Pressure Controller |
Enclosure | Type 7 & 9, 4 & 13 |
Voltage | 600 Volts AC |
Current | 5 Amps |
Operating Range | 250 PSI |
Temperature | -30 to 66 degrees Celsius |
Mounting | Bracket |
Bellows | External |
The 836T-T262E controller is an Allen-Bradley 836 series industrial pressure control unit. It is an electromechanical device with stainless steel bellows. This controller is packed inside a Type 7 & 9, 4 & 13 rated enclosure and it can be used for applications in hazardous locations. It comes with a standard trip setting and it has a voltage rating of 600 Volts AC and a current rating of 5 Amps. This industrial pressure control unit has an operating pressure rating of up to 250 PSI. The 836T-T262E controller comes with independently adjustable operating and differential pressure ranges. A 4-circuit contact block is present in this controller variant. The front side of the assembly has the operation status indicator. An external differential pressure adjustment screw helps to set the pressure range for the trip and reset ratings.
The operating temperature of the 836T-T262E controller should not exceed 66 degrees Celsius. The controller can be stored in a temperature range between -30 and 93 degrees Celsius. The exact operating temperature range is based on the absence of freezing moisture, water, and other fluids. This pressure control unit can be easily mounted without removing the front cover by using a bracket. The 836T-T262E controller can be arranged with single-pole double-throw operation or different circuits with the same polarity. The front of the controller has the nameplate and a removable paint mask that is used to match the machine or equipment color code requirements. The 836T-T262E controller can work with both open and closed electrical circuits. The trip occurs when pressure is applied to the actuators which in turn releases pressure on the main spring.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 836T-T262E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 836T-T262E. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.