836T-T262J | Allen Bradley Motors 836 Pressure Controls

836T-T262J

836T-T262J

Description:

The 836T-T262J controller is an Allen-Bradley 836 series pressure control unit. It is a T Style controller with a Type 1, 4, and 13 enclosure. Its contact block has 2 circuits and its bellows are stainless steel.

Rated 4.9 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836T-T262J

Add more parts to quote

Description:

The 836T-T262J controller is an Allen-Bradley 836 series pressure control unit. It is a T Style controller with a Type 1, 4, and 13 enclosure. Its contact block has 2 circuits and its bellows are stainless steel.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836T-T262J.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 9 reviews

    Technical Specifications for 836T-T262J

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T262J
DescriptionPressure Controller
Product Line836T
Enclosure1, 4 , 13 NEMA
Voltage120-600 Volts AC
Current10 Amps
Line Pressure500 PSI Maximum
Connection1/4 Inches NPT
Operating Pressure Range24 to 450 PSI
Temperature-30 to 66 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T262J
DescriptionPressure Controller
Product Line836T
Enclosure1, 4 , 13 NEMA
Voltage120-600 Volts AC
Current10 Amps
Line Pressure500 PSI Maximum
Connection1/4 Inches NPT
Operating Pressure Range24 to 450 PSI
Temperature-30 to 66 degrees Celsius
s

About 836T-T262J

The Allen-Bradley 836T-T262J controller is a pressure control tool. This 836 series pressure control tool is a T-style pressure controller. It has a 2-circuit contact block design and it is housed inside a Type 1, 4, and 13 enclosure. This electromechanical pressure control unit comes with external bellows made of stainless steel. This controller variant can be used with all air, water, liquids, and gas media in pressure systems. It has a contact voltage rating of 120 to 600 Volts AC and current rating of 10 Amps continuous. The operating range of the 836T-T262J controller ranges between 24 and 250 PSI. It can handle line pressures of up to 500 PSI maximum and occasional pressure surges of up to 500 PSI maximum. The enclosure rating of the assembly is NEMA 4. It uses a quarter-inch NPT female connector. No pilot light is available in this controller variant.



 



The Allen-Bradley 836T-T262J controller comes with independently adjustable operating and differential pressure ranges. It also offers pressure difference control. The front side has an operation status indicator along with an external differential adjustment screw. The unit can be mounted by using a bracket located on the bottom side along with the pressure connector. The range scale and indicator are available on the front side of the controller to make it easy to read the operating data. A blank label area is also available which can be used to add important instructions and data. The 836T-T262J controller should be operated at a temperature range between -30 and 66 degrees Celsius in a relatively humid environment with 95% maximum non-condensing humidity. The pressure control unit should not be exposed to sources of high EMC noise and high heat.



Repair Services for 836T-T262J

Type Lead Time Price Action
Repair Service 2-4 weeks $264cartAdd to Cart

Our highly skilled technicians can repair your 836T-T262J. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836T-T262J

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836T-T262J

Resolutions For 836T-T262J

About

Technical Specifications for 836T-T262J

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T262J
DescriptionPressure Controller
Product Line836T
Enclosure1, 4 , 13 NEMA
Voltage120-600 Volts AC
Current10 Amps
Line Pressure500 PSI Maximum
Connection1/4 Inches NPT
Operating Pressure Range24 to 450 PSI
Temperature-30 to 66 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T262J
DescriptionPressure Controller
Product Line836T
Enclosure1, 4 , 13 NEMA
Voltage120-600 Volts AC
Current10 Amps
Line Pressure500 PSI Maximum
Connection1/4 Inches NPT
Operating Pressure Range24 to 450 PSI
Temperature-30 to 66 degrees Celsius

About 836T-T262J

The Allen-Bradley 836T-T262J controller is a pressure control tool. This 836 series pressure control tool is a T-style pressure controller. It has a 2-circuit contact block design and it is housed inside a Type 1, 4, and 13 enclosure. This electromechanical pressure control unit comes with external bellows made of stainless steel. This controller variant can be used with all air, water, liquids, and gas media in pressure systems. It has a contact voltage rating of 120 to 600 Volts AC and current rating of 10 Amps continuous. The operating range of the 836T-T262J controller ranges between 24 and 250 PSI. It can handle line pressures of up to 500 PSI maximum and occasional pressure surges of up to 500 PSI maximum. The enclosure rating of the assembly is NEMA 4. It uses a quarter-inch NPT female connector. No pilot light is available in this controller variant.



 



The Allen-Bradley 836T-T262J controller comes with independently adjustable operating and differential pressure ranges. It also offers pressure difference control. The front side has an operation status indicator along with an external differential adjustment screw. The unit can be mounted by using a bracket located on the bottom side along with the pressure connector. The range scale and indicator are available on the front side of the controller to make it easy to read the operating data. A blank label area is also available which can be used to add important instructions and data. The 836T-T262J controller should be operated at a temperature range between -30 and 66 degrees Celsius in a relatively humid environment with 95% maximum non-condensing humidity. The pressure control unit should not be exposed to sources of high EMC noise and high heat.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $264cartAdd to Cart

Our highly skilled technicians can repair your 836T-T262J. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $264cartAdd to Cart

Our highly skilled technicians can repair your 836T-T262J. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF