836T-T263J | Allen Bradley Motors 836 Pressure Controls

836T-T263J

836T-T263J

Description:

The 836T-T263J Pressure Controller is an electromechanical pressure control unit manufactured by Allen-Bradley/Rockwell Automation. It has a 20 to 90 PSI adjustable differential pressure range, stainless steel bellows, and a NEMA type 1, 4, and 13 enclosure. It can be used with corrosive substances.

Rated 4.6 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836T-T263J

Add more parts to quote

Description:

The 836T-T263J Pressure Controller is an electromechanical pressure control unit manufactured by Allen-Bradley/Rockwell Automation. It has a 20 to 90 PSI adjustable differential pressure range, stainless steel bellows, and a NEMA type 1, 4, and 13 enclosure. It can be used with corrosive substances.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836T-T263J.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 14 reviews

    Technical Specifications for 836T-T263J

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T263J
Product Description Pressure Controller
TypeElectromechanical
Adjustable Differential Pressure Range20 to 90 PSI
Maximum Line Pressure 600 PSI
Device Style T
Operator TypeStainless Steel Bellows
Enclosure Type NEMA Type 1, 4, 13
Contact Configuration S.P.D.T, 2-circuit contact block
Factory Modification None
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T263J
Product Description Pressure Controller
TypeElectromechanical
Adjustable Differential Pressure Range20 to 90 PSI
Maximum Line Pressure 600 PSI
Device Style T
Operator TypeStainless Steel Bellows
Enclosure Type NEMA Type 1, 4, 13
Contact Configuration S.P.D.T, 2-circuit contact block
Factory Modification None
s

About 836T-T263J

The 836T-T263J Pressure Control Switch belongs to the Bulletin 836T series of electromagnetic pressure controllers made by Allen-Bradley/Rockwell Automation. It has an adjustable differential pressure range of 20 to 90 PSI, a maximum line pressure of 600 PSI, stainless steel bellows, an S.P.D.T, 2-circuit contact block, and a Style T design. The 836T-T263J Pressure Control Switch has the responsibility to open or close electrical circuits according to the pressure change in a pneumatic or hydraulic system. The contacts of the switch are electrically isolated from one another. Before ordering the switch, the users must consider the device style, pressure media, enclosure type, adjustable operating pressure range, and occasional surge pressure ratings of the switch to ensure that it is compatible with the host device. This module does not support factory modification options.          



 



The 836T-T263J Pressure Control Switch contains adjustment screws for the operating pressure range and differential pressure range. The device's essential features include a wide operating pressure range, independently adjustable operating and differential pressure ranges, pressure difference controls, a durable enclosure, and a single piston-type of actuator without a seal. This module has pressure connections and conduit entrance connections for reliable operation. The actuator type of the 836T-T263J Pressure Control Switch is electromechanical. When the switch is mounted and wired, the front cover protects the switch from dust and foreign material. The storage temperature range of the module is -30 to 93 degrees Celsius. Its 2-circuit contacts have 600 Volts AC/DC of maximum rated operational voltage. These 2-circuit contacts are not suitable to switch low voltage and current according to the NEMA ratings. This module is designed to effectively use any industrial pneumatic and hydraulic applications to control the pressure variations.



Repair Services for 836T-T263J

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T263J. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836T-T263J

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836T-T263J

Resolutions For 836T-T263J

About

Technical Specifications for 836T-T263J

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T263J
Product Description Pressure Controller
TypeElectromechanical
Adjustable Differential Pressure Range20 to 90 PSI
Maximum Line Pressure 600 PSI
Device Style T
Operator TypeStainless Steel Bellows
Enclosure Type NEMA Type 1, 4, 13
Contact Configuration S.P.D.T, 2-circuit contact block
Factory Modification None
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T263J
Product Description Pressure Controller
TypeElectromechanical
Adjustable Differential Pressure Range20 to 90 PSI
Maximum Line Pressure 600 PSI
Device Style T
Operator TypeStainless Steel Bellows
Enclosure Type NEMA Type 1, 4, 13
Contact Configuration S.P.D.T, 2-circuit contact block
Factory Modification None

About 836T-T263J

The 836T-T263J Pressure Control Switch belongs to the Bulletin 836T series of electromagnetic pressure controllers made by Allen-Bradley/Rockwell Automation. It has an adjustable differential pressure range of 20 to 90 PSI, a maximum line pressure of 600 PSI, stainless steel bellows, an S.P.D.T, 2-circuit contact block, and a Style T design. The 836T-T263J Pressure Control Switch has the responsibility to open or close electrical circuits according to the pressure change in a pneumatic or hydraulic system. The contacts of the switch are electrically isolated from one another. Before ordering the switch, the users must consider the device style, pressure media, enclosure type, adjustable operating pressure range, and occasional surge pressure ratings of the switch to ensure that it is compatible with the host device. This module does not support factory modification options.          



 



The 836T-T263J Pressure Control Switch contains adjustment screws for the operating pressure range and differential pressure range. The device's essential features include a wide operating pressure range, independently adjustable operating and differential pressure ranges, pressure difference controls, a durable enclosure, and a single piston-type of actuator without a seal. This module has pressure connections and conduit entrance connections for reliable operation. The actuator type of the 836T-T263J Pressure Control Switch is electromechanical. When the switch is mounted and wired, the front cover protects the switch from dust and foreign material. The storage temperature range of the module is -30 to 93 degrees Celsius. Its 2-circuit contacts have 600 Volts AC/DC of maximum rated operational voltage. These 2-circuit contacts are not suitable to switch low voltage and current according to the NEMA ratings. This module is designed to effectively use any industrial pneumatic and hydraulic applications to control the pressure variations.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T263J. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T263J. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF