836T-T300JX7 | Allen Bradley Motors 836 Pressure Controls

836T-T300JX7

836T-T300JX7

Description:

The 836T-T300JX7 Electromagnetic Pressure Controller is a Bulletin 836T, Style T pressure control switch designed by Allen-Bradley/Rockwell Automation. It has 40 to 550 PSI of adjustable differential pressure range, a piston without a seal, and a NEMA Type 1, 4, and 13 enclosure.  It also has a 2-circuit contact block.

Rated 4.8 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836T-T300JX7

Add more parts to quote

Description:

The 836T-T300JX7 Electromagnetic Pressure Controller is a Bulletin 836T, Style T pressure control switch designed by Allen-Bradley/Rockwell Automation. It has 40 to 550 PSI of adjustable differential pressure range, a piston without a seal, and a NEMA Type 1, 4, and 13 enclosure.  It also has a 2-circuit contact block.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836T-T300JX7.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 20 reviews

    Technical Specifications for 836T-T300JX7

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T300JX7
Product DescriptionPressure Controller
TypeElectromechanical
Adjustable Differential 40 to 550 PSI
Device Style T
Operator Type Piston Without Seal
Enclosure Type NEMA Type 1, 4, and 13
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Factory Modification None
Optional Features UNF Thread O-ring Boss Seal
Weight (approx.)3 Pounds
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T300JX7
Product DescriptionPressure Controller
TypeElectromechanical
Adjustable Differential 40 to 550 PSI
Device Style T
Operator Type Piston Without Seal
Enclosure Type NEMA Type 1, 4, and 13
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Factory Modification None
Optional Features UNF Thread O-ring Boss Seal
Weight (approx.)3 Pounds
s

About 836T-T300JX7

The 836T-T300JX7 Pressure Controller is an electromechanical pressure control switch from Allen-Bradley/Rockwell Automation. It can be used to control and monitor pneumatic and hydraulic pressure systems. It allows the users to set specific pressure values in their systems according to their application requirements. However, it is set to the minimum differential pressure rating and maximum operating pressure rating by default. The repeat accuracy of the piston without the seal is +/- 3%. It comes with a front cover that keeps foreign materials out of the enclosure. This module can be mounted without removing the protective front cover. Its silver contacts ensure control circuit flexibility. The 836T-T300JX7 Pressure Controller has a normally open contact, and a normally closed contact.  



 



The 836T-T300JX7 Pressure Controller features a UNF thread O-ring boss seal and a piston actuator. Note that this piston-type operator arrangement is not designed for use with air or water systems. However, it can be used with gas and non-corrosive liquids. The stainless steel piston-type actuator of the module has a 3/8 inches N.P.T.F. female pipe connector. It comes with the UL, CSA, and CE certifications to meet the requirements of industrial pressure systems. The main specifications of the 836T-T300JX7 Pressure Controller are 40 to 550 PSI of adjustable differential pressure, a NEMA Type 1, 4, and 13 enclosure, an S.P.D.T. contact configuration with a 2-circuit contact block, and a piston without a seal. Its piston-type actuator has an adjustable operating range of 40 to 5000 PSI, and an occasional surge pressure rating of  up to 15000 PSI. This module is suitable to use in traditional machine tools, machine hydraulic pressure applications, and lubricant and coolant pressure applications.



Repair Services for 836T-T300JX7

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T300JX7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836T-T300JX7

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836T-T300JX7

Resolutions For 836T-T300JX7

About

Technical Specifications for 836T-T300JX7

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T300JX7
Product DescriptionPressure Controller
TypeElectromechanical
Adjustable Differential 40 to 550 PSI
Device Style T
Operator Type Piston Without Seal
Enclosure Type NEMA Type 1, 4, and 13
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Factory Modification None
Optional Features UNF Thread O-ring Boss Seal
Weight (approx.)3 Pounds
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T300JX7
Product DescriptionPressure Controller
TypeElectromechanical
Adjustable Differential 40 to 550 PSI
Device Style T
Operator Type Piston Without Seal
Enclosure Type NEMA Type 1, 4, and 13
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Factory Modification None
Optional Features UNF Thread O-ring Boss Seal
Weight (approx.)3 Pounds

About 836T-T300JX7

The 836T-T300JX7 Pressure Controller is an electromechanical pressure control switch from Allen-Bradley/Rockwell Automation. It can be used to control and monitor pneumatic and hydraulic pressure systems. It allows the users to set specific pressure values in their systems according to their application requirements. However, it is set to the minimum differential pressure rating and maximum operating pressure rating by default. The repeat accuracy of the piston without the seal is +/- 3%. It comes with a front cover that keeps foreign materials out of the enclosure. This module can be mounted without removing the protective front cover. Its silver contacts ensure control circuit flexibility. The 836T-T300JX7 Pressure Controller has a normally open contact, and a normally closed contact.  



 



The 836T-T300JX7 Pressure Controller features a UNF thread O-ring boss seal and a piston actuator. Note that this piston-type operator arrangement is not designed for use with air or water systems. However, it can be used with gas and non-corrosive liquids. The stainless steel piston-type actuator of the module has a 3/8 inches N.P.T.F. female pipe connector. It comes with the UL, CSA, and CE certifications to meet the requirements of industrial pressure systems. The main specifications of the 836T-T300JX7 Pressure Controller are 40 to 550 PSI of adjustable differential pressure, a NEMA Type 1, 4, and 13 enclosure, an S.P.D.T. contact configuration with a 2-circuit contact block, and a piston without a seal. Its piston-type actuator has an adjustable operating range of 40 to 5000 PSI, and an occasional surge pressure rating of  up to 15000 PSI. This module is suitable to use in traditional machine tools, machine hydraulic pressure applications, and lubricant and coolant pressure applications.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T300JX7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T300JX7. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF