836T-T352EX26 | Allen Bradley Motors 836 Pressure Controls

836T-T352EX26

836T-T352EX26

Description:

The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is a traditional machine tool instrument. It comes with a single pressure input that is designed for mounting in outdoor or indoor industrial applications. The trip and reset pressure settings are user-configurable by using an easy-to-adjust set of calibration screws and locking nuts.

Rated 4.9 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836T-T352EX26

Add more parts to quote

Description:

The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is a traditional machine tool instrument. It comes with a single pressure input that is designed for mounting in outdoor or indoor industrial applications. The trip and reset pressure settings are user-configurable by using an easy-to-adjust set of calibration screws and locking nuts.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836T-T352EX26.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 19 reviews

    Technical Specifications for 836T-T352EX26

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352EX26
Product DescriptionElectromechanical Pressure Switch
Type of Electrical ContactsSPDT (Single Pole, Double Throw)
Number of Electrical Contacts2
Custom Trip or Reset SettingDefault Factory Setting
Operating Pressure Range40 PSI
Operator TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13 Industrial Enclosure
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5 to 95% (non–condensing)
MountingPanel or Standalone Mounting
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352EX26
Product DescriptionElectromechanical Pressure Switch
Type of Electrical ContactsSPDT (Single Pole, Double Throw)
Number of Electrical Contacts2
Custom Trip or Reset SettingDefault Factory Setting
Operating Pressure Range40 PSI
Operator TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13 Industrial Enclosure
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5 to 95% (non–condensing)
MountingPanel or Standalone Mounting
s

About 836T-T352EX26

The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is a T-type pressure measurement and control device that has been designed and manufactured by Allen Bradley to be employed in a wide variety of industrial applications. Several types of pressure media can be controlled by the Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch, including compressed air, natural gas, water, hydraulic fluids, and oil. A pair of electrical contacts are engaged (or disengaged, in the case of normally closed contacts) whenever the pressure media being monitored reaches the user-defined trip setpoint. No human intervention is required because the pressure switch is specifically designed for the automation of the pressure measurement and of the behavior of the whole application system. When the measured pressure returns to the normal reset values configured by the final users, the contacts will simultaneously return to their resting conditions, and the pressure switch will continue monitoring the pressure in the system’s media.



 



The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is very simple to install and set up, because it only needs a pressure connection and electrical contacts to be wired to the required circuits. The most common input pressure connection sizes are the 1/4 inches and 3/8 inches sizes, both with N.P.T.F. female pipe threads. The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is available with 2 different options for contact blocks, and they are the 2-circuit blocks and the 4-circuit blocks with SPDT electrical contacts. These SPDT electrical contacts will be triggered when the pressure switch registers that the set point pressure is equal to the pressure in its input port. The reset setpoint is also configurable by the final users with a set of adjusting screws and locking nuts according to the instructions provided in the product’s documentation.



Repair Services for 836T-T352EX26

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T352EX26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836T-T352EX26

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836T-T352EX26

Resolutions For 836T-T352EX26

About

Technical Specifications for 836T-T352EX26

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352EX26
Product DescriptionElectromechanical Pressure Switch
Type of Electrical ContactsSPDT (Single Pole, Double Throw)
Number of Electrical Contacts2
Custom Trip or Reset SettingDefault Factory Setting
Operating Pressure Range40 PSI
Operator TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13 Industrial Enclosure
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5 to 95% (non–condensing)
MountingPanel or Standalone Mounting
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352EX26
Product DescriptionElectromechanical Pressure Switch
Type of Electrical ContactsSPDT (Single Pole, Double Throw)
Number of Electrical Contacts2
Custom Trip or Reset SettingDefault Factory Setting
Operating Pressure Range40 PSI
Operator TypeCopper Alloy Bellows
Enclosure TypeType 1, 4, and 13 Industrial Enclosure
Operating Temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Relative Humidity5 to 95% (non–condensing)
MountingPanel or Standalone Mounting

About 836T-T352EX26

The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is a T-type pressure measurement and control device that has been designed and manufactured by Allen Bradley to be employed in a wide variety of industrial applications. Several types of pressure media can be controlled by the Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch, including compressed air, natural gas, water, hydraulic fluids, and oil. A pair of electrical contacts are engaged (or disengaged, in the case of normally closed contacts) whenever the pressure media being monitored reaches the user-defined trip setpoint. No human intervention is required because the pressure switch is specifically designed for the automation of the pressure measurement and of the behavior of the whole application system. When the measured pressure returns to the normal reset values configured by the final users, the contacts will simultaneously return to their resting conditions, and the pressure switch will continue monitoring the pressure in the system’s media.



 



The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is very simple to install and set up, because it only needs a pressure connection and electrical contacts to be wired to the required circuits. The most common input pressure connection sizes are the 1/4 inches and 3/8 inches sizes, both with N.P.T.F. female pipe threads. The Allen-Bradley 836T-T352EX26 Electromechanical Pressure Switch is available with 2 different options for contact blocks, and they are the 2-circuit blocks and the 4-circuit blocks with SPDT electrical contacts. These SPDT electrical contacts will be triggered when the pressure switch registers that the set point pressure is equal to the pressure in its input port. The reset setpoint is also configurable by the final users with a set of adjusting screws and locking nuts according to the instructions provided in the product’s documentation.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T352EX26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T352EX26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF