836T-T352JX29X26 | Allen Bradley Motors 836 Pressure Controls

836T-T352JX29X26

836T-T352JX29X26

Description:

The 836T-T352JX29X26 T-Style Pressure Controller belongs to the Allen-Bradley 836 family of pressure control products. It has a piston-type of operating mechanism and a NEMA Type 1, 4, and 13 enclosure. The rated voltage of the module is 600 Volts AC.

Rated 4.5 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 836T-T352JX29X26

Add more parts to quote

Description:

The 836T-T352JX29X26 T-Style Pressure Controller belongs to the Allen-Bradley 836 family of pressure control products. It has a piston-type of operating mechanism and a NEMA Type 1, 4, and 13 enclosure. The rated voltage of the module is 600 Volts AC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 836T-T352JX29X26.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 5 reviews

    Technical Specifications for 836T-T352JX29X26

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352JX29X26
Product DescriptionPressure Controller
Rated Voltage 600 Volts AC
Rated Current 6 Amps
Adjustable Operating Range 400-3000 psi
Device Style T
Enclosure TypeNEMA Type 1, 4, 13
Operator TypePiston
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Features O-Ring Assembly
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352JX29X26
Product DescriptionPressure Controller
Rated Voltage 600 Volts AC
Rated Current 6 Amps
Adjustable Operating Range 400-3000 psi
Device Style T
Enclosure TypeNEMA Type 1, 4, 13
Operator TypePiston
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Features O-Ring Assembly
s

About 836T-T352JX29X26

The 836T-T352JX29X26 Pressure Controller is a T-style pressure control unit that has been made by Allen-Bradley/Rockwell Automation. It has 600 Volts AC of rated nominal voltage, 6 Amps of rated current, 400 to 3000 PSI of adjustable operating pressure range, and a piston-type operator mechanism. This piston-type arrangement is not suitable to use in pressure systems with water and air. Its 2-circuit contact block arrangement offers a single-pole, double-throw operation with silver contacts. The piston-assembly of the pressure controller has stainless steel and rugged components that provide increased durability and service life. The 836T-T352JX29X26 Pressure Controller can control the pressure of a pneumatic or hydraulic industrial pressure system while using an innovative electromechanical mechanism.



 



The 836T-T352JX29X26 Pressure Controller uses an O-ring assembly as an optional accessory. It can use oil, non-corrosive liquids, and gases as pressure media in its applications. This module comes with a unique lever design to maximize the performance of the actuator motion. It is designed to be mounted without removing the front cover. The front frame helps to protect the module during installation or wiring. It offers a finger-safe contact block shield for providing safety to the operators. The enclosure of the 836T-T352JX29X26 Pressure Controller is a NEMA Type 1, 4, and 13 combined enclosure. When ordering this pressure controller, the users must consider the device style, adjustable operating and differential pressure ranges, supported pressure media, pressure connection type, actuator type, and the enclosure type of the controller and its system. It provides quick-make and quick-brake operation with the snap-action mechanism of the contacts. It also provides indicating scales in both PSI and metric units for approximating the trip settings. This module has a piston with a seal for reliable operation.



Repair Services for 836T-T352JX29X26

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T352JX29X26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 836T-T352JX29X26

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 836T-T352JX29X26

Resolutions For 836T-T352JX29X26

About

Technical Specifications for 836T-T352JX29X26

BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352JX29X26
Product DescriptionPressure Controller
Rated Voltage 600 Volts AC
Rated Current 6 Amps
Adjustable Operating Range 400-3000 psi
Device Style T
Enclosure TypeNEMA Type 1, 4, 13
Operator TypePiston
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Features O-Ring Assembly
BrandAllen-Bradley / Rockwell Automation
Series836 Pressure Controls
Part Number836T-T352JX29X26
Product DescriptionPressure Controller
Rated Voltage 600 Volts AC
Rated Current 6 Amps
Adjustable Operating Range 400-3000 psi
Device Style T
Enclosure TypeNEMA Type 1, 4, 13
Operator TypePiston
Contact Configuration S.P.D.T, 2-Circuit Contact Block
Features O-Ring Assembly

About 836T-T352JX29X26

The 836T-T352JX29X26 Pressure Controller is a T-style pressure control unit that has been made by Allen-Bradley/Rockwell Automation. It has 600 Volts AC of rated nominal voltage, 6 Amps of rated current, 400 to 3000 PSI of adjustable operating pressure range, and a piston-type operator mechanism. This piston-type arrangement is not suitable to use in pressure systems with water and air. Its 2-circuit contact block arrangement offers a single-pole, double-throw operation with silver contacts. The piston-assembly of the pressure controller has stainless steel and rugged components that provide increased durability and service life. The 836T-T352JX29X26 Pressure Controller can control the pressure of a pneumatic or hydraulic industrial pressure system while using an innovative electromechanical mechanism.



 



The 836T-T352JX29X26 Pressure Controller uses an O-ring assembly as an optional accessory. It can use oil, non-corrosive liquids, and gases as pressure media in its applications. This module comes with a unique lever design to maximize the performance of the actuator motion. It is designed to be mounted without removing the front cover. The front frame helps to protect the module during installation or wiring. It offers a finger-safe contact block shield for providing safety to the operators. The enclosure of the 836T-T352JX29X26 Pressure Controller is a NEMA Type 1, 4, and 13 combined enclosure. When ordering this pressure controller, the users must consider the device style, adjustable operating and differential pressure ranges, supported pressure media, pressure connection type, actuator type, and the enclosure type of the controller and its system. It provides quick-make and quick-brake operation with the snap-action mechanism of the contacts. It also provides indicating scales in both PSI and metric units for approximating the trip settings. This module has a piston with a seal for reliable operation.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T352JX29X26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 836T-T352JX29X26. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF